Examples Of Conversion - Toshiba NV Series Hardware Manual

Chapter 2 System Migration Procedures
2.2.6 Examples of Migration Conversion
2
40
6E8C5563
Examples of migration to PUM11 which is a combination of the S2T/S2E CPU module
and main base unit are shown below.
(1) S2T
With a station bus module mounted on the base unit:
・S2T＋BU648E
S2T（PU662T/PU672T）
BU648E
IF PS PU ALL ALL ALL ALL I/O
(1) (2) (3) (4)
(0) (5)
(0)～(8)：Slot No. S0～S8
IF: Expansion interface module
PS: Power module
PU: PU662T/PU672T
I/O: I/O module（Up to 8）
ALL: Station bus module
or I/O module
・S2T＋BU643D
S2T（PU662T/PU672T）
BU643D
IF PS PU ALL ALL ALL
(1) (2) (3)
(0)
(0)～(3)：Slot No. S0～S3
IF: Expansion interface module
PS: Power module
PU: PU662T/PU672T
ALL: Station bus module
or I/O module
Table 2.18 S2T main base unit conversion (with a station bus module mounted)
Before conversion
PU BU
S0 S1 S2 S3 S4 S5 S6 S7 S8
BU648E ☆ □ □ □
S2T
BU643D ☆ □ □ □
☆: CPU module/controller module
□: Station bus module or G2 I/O module
○: G2 I/O module
×: Not mountable (set space slot cover (EX10*ABP1)/space module (SP600))
-: Not provided
I/O I/O I/O
(6) (7) (8)
Slot
PU BU
□ ○ ○ ○ ○ BU648E ☆ □
BU643D ☆ □
PUM12
- - - - -
BU648E ☆ □
type1 light（PUM12）
BU648E
IF PS PU ALL ALL ALL ALL I/O
(1) (2) (3) (4)
(0) (5)
(0)～(8)：Slot No. S0～S8
IF: Expansion interface module
PS: Power module
PU: PUM12
I/O: I/O module（Up to 8）
ALL: Station bus module
or I/O module
type1 light（PUM12）
BU643D
IF PS PU ALL ALL ALL
(1) (2) (3)
(0)
(0)～(3)：Slot No. S0～S3
IF: Expansion interface module
PS: Power module
PU: PUM12
ALL: Station bus module
or I/O module
After conversion
Slot
S0 S1 S2 S3 S4 S5 S6 S7 S8
□ □ □ ○ ○ ○
□ □ - - - -
□ □ ✕ ✕ ✕ ✕ ✕
I/O I/O I/O
(6) (7) (8)
○
-