Base Unit - Toshiba NV Series Hardware Manual

Chapter 1 Overview of T Series Migration
1.4.2

Base Unit

There are two types of base unit applicable to the T series migration system:
The modules are inserted into the mountable slots of the base unit. The slots which are
not specified as mountable cannot be used. Be sure to mount the modules into the
specified slots.
(1) Standard base unit for unified controller type1 light
Refer to "Unified controller nv series type 1 light Controller Unit User's Manual - Basic Hardware -"
(6F8C1497) for the appearance and specification of the standard base unit.
The standard base unit for unified controller type1 light is used as:
Table 1.5 Mounting slots on the main base unit
Base unit
BU648E
BU643D
PIF: For mounting the expansion interface module (IF661)
PS: For mounting the power supply module (PS693, PS632, PS652)
S0 - S8: For mounting modules
PUM12: For mounting PUM12
PUM11: For mounting PUM11
I/O: For mounting the G2 I/O module
ALL: For mounting station bus module or G2 I/O module
◆ Remark
Be sure to install an empty module (SP600) or IF cover (SP601) for the slot which
does not contain a module.
8
6F8C1497
Standard base unit for unified controller type1 light
Base unit for T series migration systems
Main base unit (for mounting the controller module)
Expansion base unit (connected with the expansion interface module)
Remote station main base unit (for mounting the G2 I/O adapter module)
PIF PS
- - PUM12
- - PUM12
BU668 - - PUM11
BU666 - - PUM11
BU664 - - PUM11
Slot
S0 S1 S2 S3
ALL ALL ALL
ALL ALL ALL
IO IO IO
IO IO IO
IO IO IO
S4 S5 S6 S7
ALL IO IO IO
IO IO IO IO
IO IO
S8
IO
IO