Advertisement
6 Setting the Jumpers on the ROP
ROP
J4
J3
CPU
J4
J3
NOTE
There are two groups of jumpers on the ROP boards. The two groups are identified as J3 and J4.
Jumpers 9 to 10 in J3 and 1 to 6 in J4 are used for internal identification on the board.
To ensure the normal operation of the board, follow the requirements below to set the jumpers.
•Never cap jumpers 1 to 2 in group J3.
•Never cap jumpers 3 to 4 in group J3.
•Never cap jumpers 5 to 6 in group J3.
•Never cap jumpers 7 to 8 in group J3.
•Never cap jumpers 9 to 10 in group J3 (in non-extended slot numbering mode).
•Always cap jumpers 9 to 10 in group J3 (in extended slot numbering mode).
•Always cap jumpers 1 to 2 in group J4.
•Always cap jumpers 3 to 4 in group J4.
•Never cap jumpers 5 to 6 in group J4.
Jumpers 7-8 and 9-10 in group J4 are used to specify the logical slot for the ROP board.
When setting jumpers 7-8 and 9-10 in group J4 in non-extended slot numbering mode, follow the instructions below:
•When jumpers 7-8 and 9-10 in group J4 are not capped, the logical slot for the ROP board is IU28.
•When jumpers 7-8 in group J4 are capped and jumpers 9-10 are not capped, the logical slot for the ROP board is IU29.
•When jumpers 7-8 in group J4 are not capped and jumpers 9-10 are capped, the logical slot for the ROP board is IU30.
•When jumpers 7-8 and 9-10 in group J4 are capped, the logical slot for the ROP board is IU31.
When setting jumpers 7-8 and 9-10 in group J4 in the extended slot numbering mode, follow the instructions below:
•When jumpers 7-8 and 9-10 in group J4 are not capped, the logical slot for the ROP board is IU124.
•When jumpers 7-8 in group J4 are capped and jumpers 9-10 are not capped, the logical slot for the ROP board is IU125.
•When jumpers 7-8 in group J4 are not capped and jumpers 9-10 are capped, the logical slot for the ROP board is IU126.
•When jumpers 7-8 and 9-10 in group J4 are capped, the logical slot for the ROP board is IU127.
14
Advertisement
