Advertisement
Installing and Routing Fibers
1 Open Corrugated Pipe
NOTE
The open corrugated pipe cannot
be loaded with too many optical
fibers. A maximum of 60 fibers with
2 mm diameter are recommended
for an open corrugated pipe with 32
mm diameter.
The length for the open corrugated
pipe to enter the cabinet is about
10 cm.
2 Installing and Routing External Fibers
a
External Fibers in Overhead Cabling Mode External
Internal pipe
WARNING
Do not look or stare into optical fibers directly without eye protection.
NOTE
on the sides to a cabinet
When routing fibers
rotary fiber spool
on the back of the
NOTE
Choose a coiling fiber spool according to the length of redundant fibers. Wind the fibers
around the big spool first and then the smaller spool. The fibers should not be coiled too
tightly or too loosely. Ensure that the bending radius of fibers is not less than 30 mm.
1
3
38
External
pipe
, bind the fibers only at the fiber-routing holes
.
2
4
Fiber
Fiber holder
Fiber extractor
Advertisement
