Huawei B2368 Series User Manual page 84

LTE CPE B2368 User's
Guide
Figure 10-5 Security> Firewall> Access Control Figure 10-5 Security> Firewall> Access Control
Figure 10-6 Security> Firewall> Access Control (after adding ACL rules) Figure 10-6 Security> Firewall> Access Control (after adding ACL rules)
Individual fields are described in the following table.
Table 10-4 Security> Firewall> Access Control Table 10-4 Security> Firewall> Access Control
Item
Use of space for
storing the set of
rules (%)
Add new ACL rule
Name
Source IP
address
Destination IP Address
service
Policy
adjust
Issue 01
Description
This indicator shows the percentage memory is full rules LTE modem. If the
indicator is almost full, you may need before you add the new ACL rules to
remove one of the existing ones.
Click this button to add a rule to filter incoming or outgoing data stream.
Name of the relevant rules.
This field is the source IP address to which the rule applies. Note that if this field is
empty, it is the same as if the camera is set Any. empty, it is the same as if the camera is set Any.
This field is the destination IP address to which the rule applies. Note that if this field
is empty, it is the same as if the camera is set Any. is empty, it is the same as if the camera is set Any.
This field is the protocol type and port range defining a service to which the
rule applies.
This field is designed to be handled according to the rules of data packets - whether This field is designed to be handled according to the rules of data packets - whether This field is designed to be handled according to the rules of data packets - whether
they will be discarded ( DISCARD) discarded with sending TCP reset packet or ICMP they will be discarded ( DISCARD) discarded with sending TCP reset packet or ICMP they will be discarded ( DISCARD) discarded with sending TCP reset packet or ICMP
unreachable recipients ( REFUSE) or received ( ACCEPT). unreachable recipients ( REFUSE) or received ( ACCEPT). unreachable recipients ( REFUSE) or received ( ACCEPT). unreachable recipients ( REFUSE) or received ( ACCEPT).
Click on the icon adjust You can edit the policy. Click on the icon adjust You can edit the policy. Click on the icon adjust You can edit the policy.
Copyright © Huawei Technologies Co., Ltd.
10 Firewall
81