Reset Button - Huawei B2368 Series User Manual

LTE CPE B2368 User's
Guide
ICE
WPS / Wi
- Fi
LTE Signal
Strength
LAN 0 - 2 LAN 0 - 2 LAN 0 - 2
More information about the physical device connection, see Quick Start Guide. More information about the physical device connection, see Quick Start Guide.

1.5.3 RESET button

To restart the device, simply press and hold RESET 3 - 10 seconds. To restart the device, simply press and hold RESET 3 - 10 seconds. To restart the device, simply press and hold RESET 3 - 10 seconds. To restart the device, simply press and hold RESET 3 - 10 seconds. To restart the device, simply press and hold RESET 3 - 10 seconds.
To restore the default factory equipment, make sure that the LED indicator
POWER lights (flashing), then press and hold RESET more than 10 seconds. POWER lights (flashing), then press and hold RESET more than 10 seconds. POWER lights (flashing), then press and hold RESET more than 10 seconds. POWER lights (flashing), then press and hold RESET more than 10 seconds.
If you forget the password to the Web-based interface, you can use the RESET If you forget the password to the Web-based interface, you can use the RESET
on the back of the modem reset the default configuration file. This means that all settings will be lost and
password for the web interface are reset to default.
Issue 01
COLOR STATUS
Off
green
Shines
Flashing
Yellow Flashing
Off
green
Shines
blue
Shines
orange Lights
Flashing
Yellow
Shines
(Gigabit
Ethernet
above)
Flashing
Green (Fast
Shines
Ethernet)
Flashing
Off
Copyright © Huawei Technologies Co., Ltd.
Description
The telephone jack is not assigned to any SIP account.
Wireless IEEE 802.11ac 802.11bgn or is active.
LTE modem communicates with wireless client devices.
Being configured connection via WPS.
The wireless network is turned off.
Powerful LTE Signal: SINR ≥ 10 db Powerful LTE Signal: SINR ≥ 10 db Powerful LTE Signal: SINR ≥ 10 db
Moderate LTE signal: 10 db> SINR ≥ 4 db Moderate LTE signal: 10 db> SINR ≥ 4 db Moderate LTE signal: 10 db> SINR ≥ 4 db
Weak LTE signal: SINR <4 db
No LTE signal search or disconnected.
The LTE modem is successfully connected to the device
via the LAN with a transfer at 1000 Mbps.
LTE device sends / receives data to / from the network at
1000 Mbps.
The LTE modem is successfully connected to the device
via the LAN with a transfer rate of 10/100 Mbps.
LTE device sends / receives data to / from the network speed of
10/100 Mbps.
The LTE modem no device is connected via LAN.
Content
12