Operation
Filling the water tank
NOTE
►
Use only fresh drinking water to prepare espresso/cappuccino/latte
macchiatto.
1) Remove the water tank lid
of the appliance.
2) Fill it with water to at least the Min marking. Never fill it with more water
than up to the Max marking.
3) Push the water tank
clicks back into place on the appliance.
4) Put the water tank lid
Filling the milk tank
If you want to prepare drinks that contain milk froth, such as cappuccino or latte
macchiato, you must fill the milk tank
NOTE
►
You can use cow's milk or soy milk in this appliance.
1) Tilt the milk tank
and forwards out of the appliance.
2) Take off the milk tank lid
3) Fill it with milk to at least the Min marking. Never fill it with more milk than
up to the Max marking.
4) Replace the milk tank lid
5) Push the milk tank
NOTE
►
After preparing your drink, if you want to keep the milk in the milk tank
put the milk tank
NOTE
►
If the milk tank
espresso control lamps
prepare espresso, as this does not require any milk.
│
GB │ IE
■
44
and pull the water tank
back onto the appliance. Ensure that the water tank
back on.
with milk.
lightly upwards and, at the same time, pull it upwards
.
on the milk tank
back into the appliance so that it clicks into place.
into the refrigerator for storage.
is not in place or not properly inserted, both of the
/
light up. This shows that you can only
upwards and out
.
SEMM 1470 A1
,