Alarm Function - Silvercrest KH 2031 Operating Instructions Manual

Alarm function

The world receiver provides two alarms that can be set independently of
one another, AL1 and AL2. For both, you can set:
...whether the alarm should operate on every day of the week or only
from Monday to Friday;
... whether you wish to be woken by the alarm tone or the radio.
Setting the alarm time
You can set two alarm times in your world receiver.
Alarm function
Radio
Acoustic signals
Switched off
• With the radio switched off, press the buttons
The screen shows the most recently set alarm time and the symbol for
the alarm type.
UP
• Press the
at minute intervals. Hold down one of the buttons for a few seconds to
move the setting forward or backward quickly at 10 minute intervals.
VOL.+/AL–1
• Press the
(see table above) is indicated on the screen.
Symbol on the screen
No symbol
DOWN
or button to move the alarm time forward or backward
VOL.–/AL–2
(or
VOL.+/AL–1
) button until the desired alarm function
- 18 -
VOL.-/AL–2
(or ).