Door Status Switch; Optional) Intelligent Battery Monitoring System - Huawei FusionModule500 Product Description

FusionModule500 Smart Mini Data Center
Product Description (ECC800e)

3.4.6 Door Status Switch

Figure 3-19 Door status switch
Table 3-26 Door status switch technical specifications
Item
Connection method
Rated current
Opening distance
Rated power
Securing mode
Distance between mounting holes
Open-circuit voltage
Contact withstand voltage
Resistance
Switch form
Outer material

3.4.7 (Optional) Intelligent Battery Monitoring System

The intelligent battery monitoring system consists of the CIM (CIM01C2) and BIM
(BIM01C3).
The communication interface module (CIM) is an intelligent battery management module
which collects wireless communication data from the downstream BIM groups, collects and
analyzes the operating data of battery strings, calculates state of charge (SOC) and state of
health (SOH) of batteries and battery strings, estimates the battery health status, supports
battery tripping management, and uploads data to the monitoring system through COM or
PoE ports.
Issue 05 (2019-11-22) Copyright © Huawei Technologies Co., Ltd.
Specifications
Using wiring terminals
500 mA
25 mm ≤ Opening distance ≤ 45 mm
10 W
Using screws
40 mm ± 0.8 mm
100 V DC (maximum)
150 V DC (maximum)
0.3 ohm
Normally open
White acrylonitrile butadiene styrene (ABS)
engineering plastic
3 System Architecture
45