Huawei FusionModule500 Product Description page 61

FusionModule500 Smart Mini Data Center
Product Description (ECC800e)
Indicator Color
ALM Red
PWR Green
Networking Switch
Table 3-37 Networking switch description
Name
Button pressing
Button pressing
Button holding down
Issue 05 (2019-11-22)
Meaning
Alarm indicator
Power indicator

If an indicator blinks at long intervals, it is blinking at 0.5 Hz, that is, on for 1s and then off for 1s.

If an indicator blinks at short intervals, it is blinking at 4 Hz, that is, on for 0.125s and then off for
0.125s.

If an indicator blinks at super short intervals, it is blinking at 10 Hz, that is, on for 0.05s and then off
for 0.05s.

Blinking intermittently at super short intervals means an indicator blinks at super short intervals for
0.5s and then remains off for 0.5s.
Definition
Press the button for less than 1s.
Press and hold the button for
more than 1s but less than 5s.
Press and hold the button for
more than 10s but less than 20s.
Copyright © Huawei Technologies Co., Ltd.
Status
Steady on
Off
Steady on
3 System Architecture
Description Measure
The actual number Check the value
of online devices of BIM number,
is less than the the BIM cable
value of BIM connection, and
number. the BIM
indicators.
The actual number Requires no
of online devices handling.
equals the value of
BIM number.
Board power Requires no
indicator. handling.
Function
CIM blinking function
Creates a network if no
network has been created.
Switches between network
organization and data
transmission if a network has
been created.
Clears the current network
(including the network
parameters of all the online
BIMs).
55