Mitsubishi Electric MELSEC iQ-R Series User Manual page 60

RY20S6 triac output module
Item
Number of output points
Rated load voltage, frequency
Maximum load current
Load voltage distortion ratio
Maximum load voltage
Minimum load voltage/current
Maximum inrush current
Leakage current at OFF
Maximum voltage drop at ON
Response time OFFON
ONOFF
Surge suppressor
Fuse
Withstand voltage
Isolation resistance
Noise immunity
Protection degree
Wiring method for common
Number of occupied I/O points
External interface
Internal current consumption (5VDC)
Weight
■Circuit configuration
Internal
circuit
3 SPECIFICATIONS
58
3.1 Performance Specifications
Specifications
16 points
100 to 240VAC (+10%/-15%), 50/60Hz (3Hz)
0.6A/point, 4.8A/common
Within 5%
264VAC
24VAC/100mA, 100VAC/25mA, 240VAC/25mA
20A/cycle or lower
3mA or lower (at 240V, 60Hz), 1.5mA or lower (at 120V, 60Hz)
1.5V or lower (at load current of 0.6A)
Total of 1ms and 0.5 cycles or less
Total of 1ms and 0.5 cycles or less (rated load, resistive load)
CR absorber
None (Attaching a fuse to each external wiring is recommended.)
2300VACrms, 1 minute
10M or higher by isolation resistance tester
Simulator noise 1500Vp-p, noise width 1s,
noise frequency 25 to 60Hz (noise simulator condition)
IP1X
16 points/common (common terminal: TB17)
16 points (I/O assignment: Output 16 points)
18-point screw terminal block (M36 screw)
Page 104 18-point screw terminal block type module
280mA (TYP. all points ON)
0.24kg
TB1
Load
TB16
Load
TB17
100 to 240VAC
Appearance