2.6
General information on workpiece production
2.6.1 Measurement logs in JOG
When measuring the workpiece zero and the tool, you can save the values determined in a
standard log. For a standard log, you can first configure the log format (TXT, CSV), log data,
archive location and the names.
1
After the measurement has been performed, the Measurement log softkey
becomes active,
1
and you can save the measured values. Measurement logs can be generated only when using
switching probes or dynamometers.
1
42
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling