Accessing The Data Recorder File; Selecting A Data File (Dr - Explorer) - GE DMS Go Operator's Manual

3.4

Accessing the Data Recorder File

In the MAIN menu, use the joystick (
below to either create a new file name or select an existing file name.
3.4.1

Selecting a Data File (DR - EXPLORER)

1. Use the joystick (
2. A window opens with the list of files available on the installed SD card. Move the joystick up or down (
file name from the list of SD card files, and press the center of the joystick (
A window asks "Show file's properties?" Move the joystick to select YES or NO, and press the center of the joystick (
3.
the selection. (If you select YES, go to page 110 for an explanation of the Properties option.)
4. Press F1 (EXIT) to exit this function. Press F1 (HOME) to return to the Main Menu.
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
) to activate the DR submenu (see Figure 21 on page 65). Then, proceed to the appropriate section
) to select the function titled EXPLORER in the DR submenu, and move it left or right to open the function.
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Chapter 3. Creating Data Recorder Files
) to confirm the selection.
) to select the desired
) to confirm
81
1-847-577-3980
Info@BergEng.com