Safety Information
Before powering up or operating this instrument, the safety information in this section should be read carefully. This Operator's Manual
should be stored in a safe place for reference.
IMPORTANT:
This instrument is to be used only for testing materials in an industrial environment. Any use for medical applications or any
other purpose is not permitted.
IMPORTANT:
This instrument is waterproof according to IP 67 . It can be operated either with batteries or with the power supply unit. The
power supply unit meets the requirements of Electrical Safety Class II .
Batteries
For battery operation of this instrument, GE only recommends the use of a lithium-ion battery. You should only use the battery
recommended by GE for operation of this instrument. You can charge the lithium-ion battery either within the instrument itself or with the
external battery charger.
IMPORTANT:
See "Battery Disposal" on page 151 for instructions on proper battery disposal procedures.
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Preface
xiii
1-847-577-3980
Info@BergEng.com