GE DMS Go Operator's Manual page 190

Appendix E. Probes
Probe Application
DA512 Thin materials - high sensitivity -
Fingertip
DA590 High temp - continuous
measurement
DA590 High temp - intermittent
measurement
FH2E High sensitivity fingertip
FH2E-D High sensitivity fingertip -
Dialog
Notes:
•
DA590 actual temperature range depends upon surface condition, and couplant.
•
DA590 temperature cycling required with surface temperatures above 200°C (400°F) per GE Inspection Technologies instruction card.
162
Your Complete Source for
Testing Equipment. Since 1969!
Table 11: Probes for DMS Go (cont.)
Range mm
Part
Number Cable Min
1025336 potted 0.80 75.00
1346081 C120 or 2.50 300.00 0.100
C123
1346081 C120 or 2.50 300.00 0.100
C123
162571 potted 0.75 50.00
162573 potted 0.75 50.00
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Range inch
(steel) (steel)
Max Min Max
0.030 3.000
12.000 0 to +200°C
12.000 200 to 540°C
0.030 2.000
0.030 2.000
Contact
Temp Range Freq Diameter
-10 to 70°C 7.5 MHz 7.5 mm
14 to 160°F 0.296"
5 MHz 12.1 mm
32 to 400°F 0.475"
5 MHz 12.1 mm
400 to 1000°F 0.475"
-20 to +60°C 7.5 MHz 9.6 mm
0 to 140°F 0.38"
-20 to +60°C 7.5 MHz 9. 6 mm
0 to 140°F 0.38"
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com