Initial Setup - GE DMS Go Operator's Manual

Chapter 2. Instrument Setup
2.2 The Menu System (cont.)

2.3 Initial Setup

In this section, you'll learn how to configure the DMS Go display and operating features. Follow these procedures to turn the instrument ON
and make initial adjustments to the control settings. Because the instrument can be set to save the control settings when it is turned OFF and
restore them when it is turned back ON, you won't have to repeat these adjustments unless a change is required.
When you power the instrument ON, the Main Menu is automatically activated.
Note: For most menus, you can press the F1 key to return HOME to the Main Menu or exit a particular function.
24
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com