1. Remove the screw holding the body with the back cover.
2. Lift the body first at the bottom.
3. Now the body is free.
1. Remove the body in accordance with "REMOVE OF BODY".
2. Remove 2 screws holding the micro SW. with the Push SW. housing.
3. Remove 2 screws holding the Push SW. ass'y with the back cover.
4. Now the Push SW. ass'y is free.
Push SW. knob
Push SW. housing
1. Remove the body in accordance with
"REMOVE OF BODY".
2. Disconnect 3 lead wires from the triac.
3. Remove 2 screws holding with the
heater tank ass'y.
4. Now the triac is free.
REMOVE OF BODY
Screw
REMOVE OF PUSH SWITCH ASS'Y
Screw
Screw
REMOVE OF TRIAC
Screw
Triac
Fig. 23
Fig. 21
Micro SW.
Fig. 22
Breaker lead wire
White lead wire
Triac lead wire brown
Red lead wire
11
Body
Back cover
Back cover
Heater tank
Back cover