Sharp WH-T36E Service Manual page 13

1. Remove the triac in accordance with "REMOVE OF TRIAC".
2. Remove the body valve ass'y and the water outlet in accordance with "REMOVE OF BODY VALVE
ASS'Y and WATER OUTLET".
3. Remove the screw to L-Wire Earth from heater tank ass'y.
4. Remove the screw holding cable tie from the heater tank support.
5. Remove 2 screws holding triac lead wire (brown) and thermostat lead wire (yellow) with the
heater tank ass'y.
6. Remove 2 screws holding the thermostat with the heater tank ass'y.
7. Remove the thermistor ass'y from the heater tank ass'y.
8. Now the heater tank ass'y is free.
Screw
L-Wire Earth
Heater tank support
1. Remove the body in accordance with "REMOVE OF BODY".
2. Pull out all the lead wires from the PCB-A.
3. Remove 3 screws holding the PCB-A with the PCB housing.
4. Now the PCB-A is free.
REMOVE OF HEATER TANK ASS'Y
Triac lead wire brown
Screw
Cable tie
REMOVE OF PCB-A
Lead wire brown
Screw
Heater tank
Thermistor ass'y
Thermostat
Back cover
Fig. 27
13
Thermostat
lead wire red
Lead wire yellow
Thermostat lead wire yellow
Screw
Fig. 26
Screw
PCB-A
PCB housing
Back cover