How To Use - Sharp WH-T36E Service Manual

BEFORE USE
The electric home shower unit must earthed.
Special skill is required. Never try to repair the unit by yourself.
1. Turn on the MAIN WATER VALVE.
2. Switch on the MAIN BREAKER.
3. Push up the breaker angle support, if it is down.
4. Press the PUSH ON-OFF BUTTON, room temperature water will flow in and the ELB lamp lights up.
5. Turn on the WATER VOLUME KNOB to set the preferable water flow rate (see detail "TEMPERATURE
ADJUSTMENT").
6. Turn on the TEMP. CONTROL KNOB to set the preferable temperature, indication TEMP. LEVEL LAMP
and POWER LAMP lights up, the hot water will flow out (see detail "TEMPERATURE ADJUSTMENT").
7. After use, press the PUSH ON-OFF BUTTON to turn off water. For next time, just press the
PUSH ON-OFF BUTTON, the volume and temperature of water will be as first set.
Note
In case of electricity cut off or suspension of water supply, turn off the TEMP. CONTROL KNOB, press
the PUSH ON-OFF BUTTON and turn off MAIN BREAKER before leaving a bathroom.
TEMPERATURE ADJUSTMENT
1. TEMP. CONTROL KNOB.
ELB Checker
2. WATER VOLUME KNOB.
Turning the WATER VOLUME KNOB clockwise to increase water volume.
Turning the WATER VOLUME KNOB counterclockwise to decrease water volume.
3. PUSH ON-OFF BUTTON.
Press the PUSH ON-OFF BUTTON (the ELB lamp lights up) the hot water flow out. To close, repress
the PUSH ON-OFF BUTTON.
"ON" status : Button is lower than unit cover.
"OFF" status : Button is as high as unit cover.

HOW TO USE

1.1 The TEMP. CONTROL KNOB is at "OFF" position, the
water temperature will remain at room temperature.
TEMP. Control
1.2 When the TEMP. LEVEL LAMP (yellow) light up : Low level
Knob
TEMP. Level Lamp
ELB Lamp 1.3 If water temperature is lower than the setting, the CONTROL
Power Lamp
LAMP will blink. You may need to adjust the WATER
Control Lamp
VOLUME KNOB to decrease flow rate.
Push ON-OFF
1.4 The CONTROL LAMP and POWER LAMP lights up, if water
Button
temperature is to set.
1.5 When CONTROL LAMP to blink and POWER LAMP will
go off, if water temperature is equal or higher than set.
TEMP. LEVEL LAMP (orange) light up : Medium level
TEMP. LEVEL LAMP (red) light up
4
: High level