Mitsubishi Electric MELSEC- iQ-R Series Startup User's Manual page 21

Item
External Height
dimensions
Width
Depth
Weight
*1 For details on the I/O conversion characteristics, refer to the following.
Page 42 I/O Conversion Characteristics
*2 The range of data that are stored in Digital output value (32 bits)
*3 The user range setting is 0 to 24mA.
*4 Except for the conditions under noise influence.
*5 The accuracy at an ambient temperature of when the offset/gain setting is configured
*6 The rate of change per a temperature of 1. The reference temperature is 25.
*7 The cycle at which a digital output value is updated
*8 The time taken for an analog input signal to reach the A/D converter inside the module
*9 These input current values are instantaneous values at which no breakdown occurs in the internal resistance of the module.
*10 A count more than 50000 times causes Number of writes to offset/gain settings reach limit error (error code: 1080H).
*11 The external power supply is used for the 2-wire transmitter. If the current input is used for all channels used, wiring of 24VDC is not
required.
Specifications
106mm
27.8mm
110mm
0.20kg
2 SPECIFICATIONS
2.1 Performance Specifications
2
19