Mitsubishi Electric MELSEC- iQ-R Series Startup User's Manual page 23

Item
Module event history collection function
Offset/gain setting
Backing up, saving, and restoring offset/gain values
Online module change
Q compatible mode function
*1
Firmware update function
*1 The firmware update function cannot be used for modules in offset/gain setting mode.
Precautions
Check that the output from the A/D converter module is stopped before performing a firmware update. If a firmware update is
performed without stopping the output, an unintended operation may occur, causing a system failure.
Description
Collects generated errors and alarms, and performed operations in the A/D converter module as
event information into the CPU module.
Allows the correction of errors in digital output values.
The A/D converter module is capable of backing up, saving, and restoring offset/gain values of the
user range setting.
Allows module change without stopping the system. For the procedure of the online module
change, refer to the following.
 MELSEC iQ-R Online Module Change Manual
Allows the buffer memory addresses of the A/D converter module to be the same layout as the
MELSEC-Q series module.
This compatibility makes it possible to reuse sequence programs that have exhibited high
performance on the MELSEC-Q series modules.
Enables users to update the firmware versions of modules by using firmware update files. For
further details on the function, refer to the following.
 MELSEC iQ-R Module Configuration Manual
3 FUNCTION LIST
21
3