Mitsubishi Electric 800 Series Instruction Manual page 32

• FR-E840-0120(5.5K) or higher
(a)
Screwdriver Screwdriver Screwdriver
(a) Insert a tool such as a flathead screwdriver into the half-hole above the "PUSH" mark on the wiring cover to push the stopper behind the
wiring cover approx. 3 mm.
(b) Pull out the cover along the guides in the direction shown by the arrow in the figure above.
 Reinstallation of the wiring cover
• FR-E820-0050(0.75K) or lower and FR-E820S-0030(0.4K) or lower
Fit the cover to the inverter along the guides in the direction shown by the arrow in the figure above.
• FR-E820-0080(1.5K) to FR-E820-0175(3.7K), FR-E840-0016(0.4K) to FR-E840-0095(3.7K), and FR-E820S-0050(0.75K)
or higher
Fit the cover to the inverter along the guides, and push the hook into the socket.
Hook Hook Hook
(b)
Guides Guides Guides
Hooks Hooks Hooks
Guides Guides Guides
2.2 Removal and reinstallation of the front cover
1
2
Guides Guides Guides
3
4
5
6
7
8
9
10
31
2. Installation and Wiring