4
PROCEDURES BEFORE OPERATION
This chapter explains the procedures before operation.
1.
Wire a module.
Connect a cable to a BACnet module.
Page 35 WIRING
2.
Power the system ON.
3.
Set the BACnet module.
BACnet modules can be set by either engineering tool or web browser.
Page 24 Configuring Settings Using Engineering Tool
Page 26 Configuring Settings Using a Web Browser
4.
Create a program.
Page 37 OPERATING EXAMPLE
5.
Reset the system.
6.
Execute the program.
7.
Start the operation of the BACnet module.
4 PROCEDURES BEFORE OPERATION
4
23