4.1
Configuring Settings Using Engineering Tool
This section shows the procedure to configure the settings using an engineering tool.
Addition of a profile
When using any of the following versions of GX Works3, the profile of a BACnet module needs to be registered manually.
• 1.032J
• 1.033K
For the information on how to obtain the profile of BACnet module, please consult your local Mitsubishi representative.
Startup method
Operating procedure
Select [MELSOFT] [GX Works3]
*1 Select [All apps] in the Start screen or [Start] [All Programs]/[All apps].
*2 Does not appear in Windows 8 or later.
Parameter setting
Operating procedure
1.
Create a new project.
Select [Project] [New] from the menu.
2.
Set "Series", "Type", and "Program Language", and click the [OK] button.
3.
Click the [Setting Change] button to set to use module labels.
4.
The "Add New Module" screen appears.
Navigation window [Parameter] right-click [Module Information] [Add New Module]
4 PROCEDURES BEFORE OPERATION
24
4.1 Configuring Settings Using Engineering Tool
*2
[GX Works3] from Windows
*1
Start
.