7.2
Writing Values
This section shows an operating example when writing values to another BACnet device in the system using a BACnet
module.
Write a real number '1.0' to the PresentValue property of an AnalogOutput object (instance number: 10) in a BACnet controller
(instance number of a device: 3) from a BACnet workstation.
Operating procedure
Configure settings with the following procedure.
1.
Setting network for a configuration personal computer.
Set an IP address. (Page 39 Setting network for a configuration personal computer)
2.
Setting a BACnet module (BACnet controller). (Page 40 Setting a BACnet module (BACnet controller))
Register an AnalogOutput object (instance number: 10) (AO-10).
3.
Setting a BACnet module (BACnet workstation). (Page 43 Setting a BACnet module (BACnet workstation))
Assign a data block (access block for writing) to the buffer memory.
4.
Creating a program. (Page 46 Creating a program)
Create a program to store values to the data block (access block for writing).
5.
Checking the operation. (Page 49 Checking the operation)
Write a real number '1.0' to a PresentValue property, then check the write result on a web browser.
Setting network for a configuration personal computer
1.
Set an IP address of a configuration personal computer.
Page 26 Setting network for a configuration personal computer
Item
IP address
Subnet musk
2.
Set a web browser.
Page 27 Setting a web browser
Description
192.168.0.155
255.255.255.0
7 OPERATING EXAMPLE
39
7.2 Writing Values
7