Yamaha MOTIF ES6 Data List page 59

When controlling Logic:
Functions assigned to [F1] - [F6] and [SF1] - [SF5] buttons
ASSIGNMENT
SEND
PAN/SEND
TRACK PAN/SURND
FADER BANKS
TONE
FLIP
CHANNEL-L CHANNEL-R
GLOBAL VIEW
ARP FX
AUX
MIDI TR INPUTS
UTILITIES
SAVE
EQ
CANCEL ENTER
PAN/SEND
F5
F1 F2
TONE
TONE
NUDGE
ARP FX
MARKER CYCLE
ARP FX
CURSOR-L CURSOR-R
CURSOR-DWN CURSOR-UP
EQ
Button/Controller
In all modes:
[NAME/VALUE] Changes the indication of the parameter name and its value.
[SHIFT]+[NAME/VALUE] Changes the meter display mode.
[SEL] Selects a channel.
[MUTE] Mutes or unmutes each channel.
[OPTION]+[MUTE] Sets all channels to on.
[SOLO] Sets the Solo of each channel to on or off.
[OPTION]+[SOLO] Sets the Solo of all the channels to off.
[REC RDY] Sets the REC RDY of each channel to on or off.
[OPTION]+[REC RDY] Sets the REC RDY of all the channels to off.
[MIDI TR] Makes the Global View mode active and displays the MIDI track
with the Multi Channel view.
[INPUT] Makes the Global View mode active and displays the AUDIO
INPUT object with the Multi Channel view.
[AUDIO TR] Makes the Global View mode active and displays the Audio track
with the Multi Channel view.
[AUDIO INST] Makes the Global View mode active and displays the Audio
Instrument track with the Multi Channel view.
[AUX] Makes the Global View mode active and displays the AUX object
with the Multi Channel view.
[BUSSES] Makes the Global View mode active and displays the BUS object
with the Multi Channel view.
[OUTPUT] Makes the Global View mode active and displays the AUDIO
OUTPUT object with the Multi Channel view.
[GLOBAL VIEW] Switches between the Global View mode and Track View mode.
[BANK </>] Scrolls through the track indication every eight channels.
[CHANNEL </>] Scrolls through the track indication channel-by-channel.
[SHIFT]+[FLIP] Exchanges the functions between the Channel Knobs and the
Faders.
[FLIP] Assigns the function of the Channel Knob to the Fader.
[NUDGE] Turns Nudge on or off.
[SHIFT]+[NUDGE] Enters the Nudge Option mode.
[CYCLE] Turns Loop on or off.
[SHIFT]+[CYCLE] Enters the Cycle Option mode.
[F1] - [F7] Calls up Screen Sets 1 - 7.
[F8] Closes the window located at the front of the computer or floating
window.
[UNDO] Executes the Undo operation.
PLUG-IN INSTRUMENT DIAL RESET KN1-4/5-8
EQ BANK-L BANK-R SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
BANK-L BANK-R SHIFT
BUSSES OUTPUTS USER KN1-4/5-8
AUDIO TR AUDIO INST GLOBAL VIEW SHIFT
UNDO NAME/VALUE DIAL RESET KN1-4/5-8
BANK-L BANK-R SHIFT
F6 F7 F8 KN1-4/5-8
F3 F4 SHIFT
DROP CLICK DIAL RESET KN1-4/5-8
REPLACE SOLO SHIFT
SCRUB DIAL RESET KN1-4/5-8
ZOOM BANK-L BANK-R SHIFT
Functions
Button/Controller
[SHIFT]+[UNDO] Executes the Redo operation.
[SAVE] Executes the Save operation.
[MARKER] Turns the Marker on or off.
[SHIFT]+[MARKER] Enters the Marker Option mode.
[RWD] Press to continuously rewind. Press repeatedly to rewind more
quickly. When the Marker is turned on, this operation moves the
song position to the previous Marker. When Nudge is turned on,
this operation moves the current object.
[FF] Press to continuously fast-forward. Press repeatedly to fast-forward
more quickly. When the Marker is turned on, this operation moves
the song position to the next Marker. When Nudge is turned on, this
operation moves the current object.
[STOP] Press to stop recording or playback. Pressing this when playback
is stopped goes to the top of the song.
[PLAY] Press to start playback from the current point.
[REC] Press this to start song recording. The [F] (Play) and [I] (Rec)
lamp are turned on during recording.
[ZOOM] Turns Zoom on and off.
[SCRUB] Turns Scrub on and off. When Scrub is on, the dial can be used for
Scrub playback. When Scrub is off, the dial is used to move the
song position.
PAN mode [PAN] (Multi Channel View)
[PAN] → [PAN] (Track Parameter View of PAN/SURROUND)
Cursor [LEFT] Changes the parameter to be edited.
Cursor [RIGHT]
(Multi Channel View)
Knobs 1 - 8 (turning/turning →
Edits the parameter. Tweak the Knob to select "Pan" or "Surround"
pressing) so that the Pan/Surround indication flashes, then press the Knob to
actually select either of them.
Knobs 1 - 8 (pressing) Resets the edited parameter to the default value.
(Parameters other than Mode When selecting the mode ("Pan" or "Surround"), turn the
selection) corresponding knob to select either of them so that the indication
flashes, then press the knob to actually enter the selected one.
EQ mode [EQ] (Multi Channel View)
[EQ] → [EQ] (Track Parameter View)
Cursor [UP]/[DOWN] Changes the Slot number.
(Multi Channel View)
Cursor [LEFT] Changes the parameter to be edited.
Cursor [RIGHT]
(Multi Channel View)
Cursor [LEFT] Switches between EQ1/2 and EQ3/4.
Cursor [RIGHT]
(Track Parameter View)
Knobs 1 - 8 (turning) For editing parameters.
Knobs 1 - 8 (pressing) Turns the EQ bypass on or off.
(when the edited parameter is
Type)
Knobs 1 - 8 (pressing) Resets the parameter value to its default.
(when the edited parameter is
other than Type)
SEND mode [SEND] (Multi Channel View)
[SEND] → [SEND] (Track Parameter View)
Cursor [UP]/[DOWN] Changes the Slot number.
(Multi Channel View)
Cursor [LEFT] Changes the parameter to be edited.
Cursor [RIGHT]
(Multi Channel View)
Cursor [LEFT] Switches between SEND 1/2 and SEND 3/4...
Cursor [RIGHT]
(Track Parameter View)
Knobs 1 - 8 (turning/turning →
For editing parameters. When setting the Send destination, turn
pressing) the knob to select it (indication flashes), then press the knob to
actually enter the selected setting.
Knobs 1 - 8 (pressing) Reset the parameter value to the default.
(when the edited parameter is
Send Level)
Knobs 1 - 8 (pressing) Changes the setup.
(when the edited parameter is
PRE/POST or Mute)
PLUG-IN mode [PLUG-IN] (Multi Channel View)
[PLUG-IN] → [PLUG-IN] (Track Parameter View)
Cursor [UP]/[DOWN] Changes the Slot number.
(Multi Channel View)
Knobs 1 - 8 (tweaking →
Turn the knob to select the desired Plug-in for insertion (indication
pressing) flashes), then press the knob to actually enter the selected setting.
Knobs 1 - 8 (pressing) Calls up the parameter page and opens the Editor window on
(Knob to which the Plug-in is Logic.
assigned)
Knobs 1 - 8 (tweaking) For editing parameters.
(Parameter page)
Knobs 1 - 8 (pressing) Reset the parameter value to the default. (Some parameters
(Parameter page) cannot be reset.)
Cursor [LEFT] Changes the page.
Cursor [RIGHT]
(Parameter page)
[PLUG-IN] Return to the PLUG-IN mode.
Remote Control Assignments
Functions
59
Data List