Yamaha MOTIF ES6 Data List page 61

When controlling SONAR:
Functions assigned to [F1] - [F6] and [SF1] - [SF5] buttons
ASSIGNMENT
SENDS
PAN/SEND
TRACKS PAN
FADER BANKS
TONE
FLIP
CHANNEL-L CHANNEL-R
TRACKS/DIALOG/WINDOW
ARP FX
OK/ENTER
NEW AUDIO NEW MIDI
TRACK
EQ
SAVE UNDO
PAN/SEND
F5
F1 F2
TONE
TONE
JOG PRM LOOP ON/OFF
ARP FX
MAKER LOOP
ARP FX
CURSOR-L CURSOR-R
CURSOR-DWN CURSOR-UP
EQ
Button/Controller
In all modes:
[EDIT] Assigns a parameter to a Knob by using the [CHANNEL] and
[BANK] buttons.
[CHANNEL </>] (Multi channel) Changes a parameter to be edited via a Knob in order one by one
when [EDIT] is turned on.
[BANK </>] (Multi channel) Changes the parameters to be edited via a Knob in groups of eight
when [EDIT] is turned on.
[CHANNEL </>] Changes an indicated parameter in order one by one when [EDIT]
(Selected channel) is turned on.
[BANK </>] (Selected channel) Changes the indicated parameters in groups of eight when [EDIT]
is turned on.
[NAME/VALUE] Changes the indication of the parameter name and its value.
[SEL] Selects a channel.
[MUTE] Mutes or unmutes each channel.
[M4]+[MUTE] Unmutes all channels.
[SOLO] Sets Solo for each channel to on or off.
[M4]+[SOLO] Sets Solo for all channels to off.
[REC RDY] Sets the REC RDY of each channel to on or off.
[M4]+[REC RDY] Sets the REC RDY of all channels to off.
[TRACK] Assigns a Track to a Fader.
[AUX] Assigns an AUX BUS to a Fader.
[MAIN] Assigns output level adjustment of the Virtual Main Bus to the
Faders.
[BANK </>] Scrolls through the track indication every eight channels.
[CHANNEL </>] Scrolls through the track indication channel-by-channel.
[FLIP] Assigns the functions of the Channel Knobs to the Faders.
[FLIP] → [FLIP]
Switches the functions of the Channel Knobs and the Faders.
[NEXT WINDOW] Moves the next window to the front of the screen.
[LOOP SW] Sets Loop to on or off.
[F1] - [F8] [F1] - [F8] as defined in SONAR.
[CLOSE WINDOW] Closes the current window.
[UNDO] Executes the Undo operation.
[REDO] Executes the Redo operation.
[SAVE] Executes the Save operation.
[M1]+[MARKER] Opens the window for entering the Marker to the current song
position.
[MARKER] Turns the Marker on or off.
[RWD] Press briefly to move back one measure at a time, or hold to
continuously rewind.
When the Marker is turned on, this operation moves the song
position to the previous Marker.
PLUG-INS DYN DIAL RESET KN1-4/5-8
EQ BANK-L BANK-R M1
EDIT NAME/VALUE DIAL RESET KN1-4/5-8
BANK-L BANK-R M1
CANCEL NEXT WINDOW CLOSE WINDOW KN1-4/5-8
FIT TRACK FIT PROJECT M1
AUX MAIN DIAL RESET KN1-4/5-8
REDO BANK-L BANK-R M1
F6 F7 F8 KN1-4/5-8
F3 F4 M1
HOME DIAL RESET KN1-4/5-8
SELECT PUNCH M1
SCRUB DIAL RESET KN1-4/5-8
ZOOM BANK-L BANK-R M1
Functions
Button/Controller
[M1]+[RWD] Moves the song position to the top of the song. When the Marker is
turned on, this operation opens the window for entering the Marker.
[FF] Press briefly to move forward one measure at a time, or hold to
continuously fast-forward.
When the Marker is turned on, this operation moves the song
position to the next Marker.
[M1]+[FF] Moves the song position to the end of the song. When the Marker
is turned on, this operation opens the window for entering the
Marker.
[STOP] Stops recording or playback.
[PLAY] Press to start playback from the current point.
[REC] Press this to start song recording. The [F] (Play) and [I] (Rec)
lamp are turned on during recording.
[ZOOM] Turns Zoom on and off.
[SCRUB] Turns Scrub on and off. When Scrub is on, the dial can be used for
Scrub playback. When Scrub is off, the dial is used to move the
song position.
[JOG PRM] Turns Data Entry on and off. When turned on (the lamp lights),
rotating the dial has the Data Entry function.
TRACK mode [TRACKS] (Track Parameter mode)
[TRACKS] → [TRACKS] (Selected Channel mode)
Knobs 1 - 8 (turning) For editing parameters. (The LCD indication may not be updated.)
Knobs 1 - 8 (pressing) Resets the parameter value to its default.
PAN mode [PAN]
[PAN] → [PAN] (Selected Channel mode of PAN/SURROUND)
Knobs 1 - 8 (turning) For editing parameters.
Knobs 1 - 8 (pressing) Resets the parameter value to its default.
SEND mode [SENDS]
[SENDS] → [SENDS] (Selected Channel mode)
Knobs 1 - 8 (turning) For editing parameters.
Knobs 1 - 8 (pressing) Resets the parameter value to its default.
PLUG-IN mode [PLUG-IN]
[PLUG-IN] → [PLUG-IN] (Selected Channel mode)
[M1]+[CHANNEL </>] Changes the Plug-in number when the [EDIT] is turned on.
Knobs 1 - 8 (turning) For editing parameters.
Knobs 1 - 8 (pressing) Resets the parameter value to its default.
EQ Edit [EQ]
[EQ] → [EQ] (Selected Channel mode)
(in the Selected Channel mode) [EQ] (Band mode)
[M1]+[CHANNEL </>] Changes the EQ number when the [EDIT] is turned on.
Knobs 1 - 8 (Band mode) For editing each frequency band.
Faders (Band mode) For editing the gain of each Band.
DYNAMICS (compressor) Edit [DYN]
[DYN] → [DYN] (Selected Channel mode)
[M1]+[CHANNEL </>] Changes a DYN number when [EDIT] is turned on.
Knobs 1 - 8 (turning) For editing parameters.
Knobs 1 - 8 (pressing) Resets the parameter value to the default.
The Song Position Bar may not synchronize with the actual playback position during Scrub playback.
Parameters to be edited may differ depending on the assigned Effect and Software Tone Generator.
Some parameters may not be available depending on the selected Effect Type.
Press the [ARPEGGIO ON/OFF] button to indicate the Track/Slot/EQ/DYN number in the brackets [ ] at
the top of the LCD.
The [M2] - [M4] buttons on the Mackie Control correspond respectively to the [EDIT], [JOB], and
[STORE] buttons at left below the LCD.
Additional operations other than those listed above are available. For details, refer to the relevant
documentation of Mackie Control.
You can find the Help window by selecting "Mackie Control" from the Tool Menu on SONAR and pressing
the [F1] button.
Please keep in mind that some functions may not be available.
Remote Control Assignments
Functions
61
Data List