Yamaha MOTIF ES6 Data List page 64

MIDI Data Format
SYNTHESIZER/SEQUENCER PART
(1) TRANSMIT FLOW
MIDI <-+-[SW1]--+---------NOTE ON/OFF
OUT | |
| +---------KEY'S AFTER TOUCH
| |
| +---------CONTROL CHANGE (All in Seq)
| | MODULATION
| | VOLUME
| | PAN
| | SUSTAIN SWITCH
| | FILTER RESONANCE
| | EG RELEASE TIME
| | EG ATTACK TIME
| | FILTER CUTOFF FREQ
| | EG DECAY TIME
| | REVERB SEND
| | CHORUS SEND
| | ASSIGNABLE CONTROLLERS
| | SEQ REMOTE CONTROL
| |
| +--[SW7]--BANK SEL MSB
| | BANK SEL LSB
| |
| +---------CHANNEL MODE MESSAGE (Seq only)
| | RESET ALL CONTROLLERS
| | LOCAL CONTROL
| | OMNI MODE OFF
| | OMNI MODE ON
| | MONO MODE ON
| | POLY MODE ON
| |
| +--[SW8]--PROGRAM CHANGE
| |
| +---------CHANNEL AFTER TOUCH
| |
| +---------PITCH BEND CHANGE
|
+--[SW4]------------SYSTEM COMMON MESSAGE
| SONG POSITION POINTER
| SONG SELECT
|
+--[SW4]-----------SYSTEM REALTIME MESSAGE
| TIMING CLOCK
| START
| CONTINUE
| STOP
|
+-------------------ACTIVE SENSING
|
+--[SW5]-+----------SYSTEM EXCLUSIVE MESSAGE (All in Seq)
| +--[SW6]-- <BULK DUMP>
| | F0H 43H 0nH 7FH 00H bhH blH ahH amH alH ddH....ddH ccH F7H
| |
| +--[SW6]-- <PARAMETER CHANGE>
| F0H 43H 1nH 7FH 00H ahH amH alH ddH.....ddH F7H
|
+-------------------SYSTEM EXCLUSIVE MESSAGE
| IDENTITY REPLY
| F0H 7EH 7FH 06H 02H 43H 00H 41H 69H (or 6AH or 6BH) 05H 00H 00H
| 00H 7FH F7H
+--[SW3,4]----------MIDI MACHINE CONTROL
STOP
DEFERRED PLAY
LOCATE
[SW1] MIDI Transmit Channel
In the Master mode: complies with Zone Transmit Channel.
In the mode other than the Master: complies with Keyboard Transmit Channel.
The sequence data played back in the Song/Pattern mode is transmitted according to the MIDI Filter settings.
[SW2] MIDI Control Mode
[SW3] MIDI Sync (transmitted when the MIDI Sync is set to MTC.)
[SW4] Seq MIDI Control
[SW5] MIDI Device Number
When set to all, transmitted via 1.
The sequence data played back in the Song/Pattern mode is transmitted according to the MIDI Filter settings.
[SW6] The System data can be transmitted/recognized in any mode.
Regarding the other types of data, it depends on the current mode whether they can be transmitted/recognized or
not.
[SW7] SYSTEM Bank Select Switch
[SW8] SYSTEM Program Change Switch
(2) RECEIVE FLOW
MIDI>-+-[SW10]--+---------NOTE OFF
| |
| +---------NOTE ON/OFF
| |
| +---------KEY'S AFTER TOUCH
| |
| +---------CONTROL CHANGE (All in Seq)
| | MODULATION
| | PORTAMENTO TIME
| | DATA ENTRY MSB
| | DATA ENTRY LSB
| | MAIN VOLUME
| | PAN
| | EXPRESSION
| | SUSTAIN SWITCH
| | PORTAMENTO SWITCH
| | SOSTENUTO
| | HARMONIC CONTENT
| | EG RELEASE TIME
| | EG ATTACK TIME
| | BRIGHTNESS
| | EG DECAY TIME
64
Data List
9nH
AnH (Seq only)
BnH,01H
BnH,07H
BnH,0AH
BnH,40H
BnH,47H
BnH,48H
BnH,49H
BnH,4AH
BnH,4BH
BnH,5BH
BnH,5DH
BnH,(00H..5FH)
BnH,(00H..7FH)
BnH,00H
BnH,20H
BnH,79H
BnH,7AH
BnH,7CH
BnH,7DH
BnH,7EH
BnH,7FH
CnH
DnH
EnH
F2H
F3H
F8H
FAH
FBH
FCH
FEH
*3
*3
F0H 7FH 7FH 06H 01H F7H
F0H 7FH 7FH 06H 03H F7H
F0H 7FH 7FH 06H 44H 06H 01H hrH
mnH scH frH ffH F7H
[SW2]
[SW3]
[SW4]
[SW5]
[SW6]
[SW7]
[SW8]
[SW9]
[SW10]
[SW11]
*2: Available only for the Plug-in voices
*3: Recognized/transmitted only when the Plug-in voice (MODEL ID = 0x64) is selected.
8nH
9nH
AnH (Seq only)
BnH,01H
BnH,05H
BnH,06H
BnH,26H
BnH,07H
BnH,0AH
BnH,0BH
BnH,40H
BnH,41H
BnH,42H
BnH,47H
BnH,48H
BnH,49H
BnH,4AH
BnH,4BH
| | EFFECT1 DEPTH
| | EFFECT3 DEPTH
| | DATA ENTRY INC
| | DATA ENTRY DEC
| | ALL SOUND OFF
| | ASSIGNABLE CONTROLLER
| | NRPN
| | RPN
| | PITCH BEND SENS.
| | FINE TUNING
| |
| | COARSE TUNING
| | RPN RESET
| +--[SW2]--EG SUSTAIN LEVEL
| |
| +--[SW7]--BANK SEL MSB
| | BANK SEL LSB
| |
| +---------CHANNEL MODE MESSAGE
| | RESET ALL CONTROLLERS
| | LOCAL CONTROL
| | OMNI MODE OFF
| | OMNI MODE ON
| | MONO MODE ON
| | POLY MODE ON
| |
| +--[SW8]--PROGRAM CHANGE
| |
| +---------CHANNEL AFTER TOUCH
| |
| +---------PITCH BEND CHANGE
|
+--[SW3]------------SYSTEM COMMON MESSAGE
| MTC QUARTER FRAME MESSAGE
|
+--[SW4]------------SYSTEM COMMON MESSAGE
| SONG POSITION POINTER
| SONG SELECT
|
+--[SW3]------------SYSTEM REALTIME MESSAGE
| TIMING CLOCK
|
+--[SW4]------------SYSTEM REALTIME MESSAGE
| START
| CONTINUE
| STOP
|
+-------------------ACTIVE SENSING
|
+--[SW5]-+-----+----SYSTEM EXCLUSIVE MESSAGE (All in Seq)
| | MIDI MASTER VOLUME
| |
| +--[SW9]---<BULK DUMP>
| | F0H 43H 0nH 7FH 00H bhH blH ahH amH alH ddH....ddH ccH F7H
| |
| +--[SW6]---<PARAMETER CHANGE>
| | F0H 43H 1nH 7FH 00H ahH amH alH ddH.....ddH F7H
| |
| +--[SW6]---<BULK DUMP REQUEST>
| | F0H 43H 2nH 7FH 00H ahH amH alH ddH.....ddH F7H
| |
| +--[SW6]---<PARAMETER REQUEST>
| | F0H 43H 3nH 7FH 00H ahH amH alH F7H
| |
| +--[SW11]--XG SYSTEM ON
| | F0H 43H 1nH 4CH 00H 00H 7EH 00H F7H
| |
| +--[SW11]--GM MODE ON
| F0H 7EH 7FH 09H 01H F7H
|
+-------------------SYSTEM EXCLUSIVE MESSAGE
IDENTITY REQUEST
SECTION CONTROL
MIDI Control Mode
MIDI Sync (can be set to "internal," "MIDI," or "MTC.")
Seq MIDI Control
MIDI Device Number
When this is not set to off, the MIDI Master Volume can be recognized in any mode.
The sequence data played back in the Song/Pattern mode is transmitted according to the MIDI Filter settings.
The System data can be transmitted/recognized in any mode.
Regarding the other types of data, it depends on the current mode whether they can be transmitted/recognized or
not.
SYSTEM Bank Select Switch
SYSTEM Program Change Switch
SYSTEM Bulk Protect and same as SW6.
MIDI Receive Channel and Receive Filter
In the Song/Pattern mode: complies with Part Receive Channel and Part Receive Switch.
In the other mode: complies with Basic Receive Channel.
The sequence data recorded to the Song/Pattern is recognized according to the MIDI Filter settings.
SYSTEM Receive GM/XG On
BnH,5BH
BnH,5DH
BnH,60H
BnH,61H
BnH,78H
BnH,(00H..5FH)
BnH,62H,63H *2
BnH,64H,00H,65H,00H,06H,mmH
BnH,64H,01H,65H,00H,06H,mmH,
26H,llH
BnH,64H,02H,65H,00H,06H,mmH
BnH,64H,7FH,65H,7FH
BnH,1FH
BnH,00H
BnH,20H
BnH,79H
BnH,7AH
BnH,7CH
BnH,7DH
BnH,7EH
BnH,7FH
CnH
DnH
EnH
F1H
F2H
F3H
F8H
FAH
FBH
FCH
FEH
F0H 7FH 7FH 04H 01H llH mmH F7H
*3
*3
*3
*3
F0H 7EH 0nH 06H 01H F7H
F0H 43H 7EH 00H ssH 7FH F7H
(Pattern Mode only)