Yamaha MOTIF ES6 Data List page 60

Remote Control Assignments
Button/Controller
INSTRUMENT mode [INSTRUMENT] (Multi Channel View)
[INSTRUMENT] → [INSTRUMENT] (Track Parameter View)
Knobs 1 - 8 (tweaking →
Turn the knob to select the desired instrument for insertion
pressing) (indication flashes), then press the knob to actually enter the
selected setting.
Knobs 1 - 8 (pressing) Calls up the parameter page and opens the Editor window on
(a Knob to which the Instrument Logic.
is assigned)
Knobs 1 - 8 (tweaking) Edits the parameter.
(Parameter page)
Knobs 1 - 8 (pressing) Resets the edited parameter value to the default. (Please note that
(Parameter page) some parameters cannot be reset.)
Cursor [LEFT] Changes the page.
Cursor [RIGHT]
(Parameter page)
[INSTRUMENT] Return to the INSTRUMENT mode.
Press the [ARPEGGIO ON/OFF] button to indicate the Track/Slot number in the brackets [ ] at the top of
the LCD.
The [OPTION], [CONTROL], and [ALT] buttons on the Logic Control corresponds to the [EDIT], [JOB],
and [STORE] buttons at left below the LCD respectively.
Additional operations other than those listed above are available. For details, refer to the relevant
documentation of Logic Control.
When controlling Cubase SX:
Functions assigned to [F1] - [F6] and [SF1] - [SF5] buttons
ASSIGNMENT
PAGE UP
PAN/SEND
PAGE DWN
FADER BANKS
TONE
FLIP
CHANNEL-L
ARP FX
MASTER
SENDS
FaderGroup
5
EQ
1
PAN/SEND
F5
F1
TONE
TONE
PROJECT
LEFT
ARP FX
ARP FX
CURSOR-L
CURSOR-DWN
EQ
60
Data List
Functions
PLUG-INS DYN DIAL RESET KN1-4/5-8
PAN EQ BANK-L BANK-R
EDIT NAME/VALUE DIAL RESET KN1-4/5-8
CHANNEL-R BANK-L BANK-R
SAVE REVERT DIAL RESET KN1-4/5-8
INSTRUMENTS UNDO REDO
6 7 8 KN1-4/5-8
2 3 4
F6 F7 F8 KN1-4/5-8
F2 F3 F4
MIXER SOLO DEFAT DIAL RESET KN1-4/5-8
RIGHT CYCLE PUNCH
CURSOR-R ADD DIAL RESET KN1-4/5-8
CURSOR-UP PREV NEXT EDIT
Button/Controller
In all modes:
[PAGE UP]
[PAGE DOWN]
[SHIFT]+[PAGE UP]
[SHIFT]+[PAGE DOWN]
[NAME/VALUE]
[SEL]
[MUTE]
[SHIFT]+[SOLO DEFEAT]
[SOLO]
[SOLO DEFEAT]
[REC RDY]
[BANK </>]
[CHANNEL </>]
[FLIP]
[EDIT]
[CYCLE]
[F1] - [F8]
[PROJECT]
[MIXER]
[SHIFT]+[EDIT]
[1] – [8]
[UNDO]
[REDO]
[SAVE]
[ADD]
[RWD]
[SHIFT]+[RWD]
[PREV]
[FF]
[SHIFT]+[FF]
[NEXT]
SHIFT [STOP]
[PLAY]
[REC]
SHIFT
PAN mode [PAN] (MULTI CHANNEL only)
Knobs 1 - 8
EQ mode [EQ] (SELECTED CHANNEL only)
SHIFT
Knobs 1 - 8
SEND mode [DYN] (SELECTED CHANNEL only)
Knobs 1 - 8
PLUG-IN mode [PLUG-IN] (SELECTED CHANNEL only)
SHIFT
Knob 1
Knob 2
Knob 3
Knobs 1 - 8 (turning)
SHIFT
SEND EFFECT mode [SENDS]/MASTER EFFECT mode [MASTER] (Global mode only)
Knob 1
Knob 2
SHIFT Knobs 1 - 8
INSTRUMENT mode [INSTRUMENTS] (Global mode only)
Knob 1
Knob 2
SHIFT
Knobs 1 - 8
When changing the assigned Effect Type, you need to change the Slot Number or go to another page
and return back to the original page, in order to enable the correct page indication.
Parameters to be edited differ depending on the assigned Effect and Software Tone Generator.
An error message may appear depending on the MIDI related settings.
Additional operations other than those listed above are available. For details, refer to the relevant
documentation of Mackie Control.
Functions
Calls up the next/previous page.
Calls up the first page.
Calls up the last page.
Changes the indication of the parameter name and its value.
Selects a channel.
Mutes or unmutes each channel.
Unmutes all channels.
Sets Solo for each channel to on or off.
Sets Solo for all channels to off.
Sets the REC RDY of each channel to on or off.
Scrolls through the track indication every eight channels.
Scrolls through the track indication channel-by-channel.
Switches the functions of the Channel Knobs and Faders.
Opens the Edit window for the currently selected block (AUDIO/
MIDI).
Turns Loop on or off.
[F1] - [F8] as defined in Cubase SX.
Brings the Track View window to the front of the computer screen.
Opens the Mixer window.
Closes the current window.
Corresponds to 1 - 8 of the Channel View on the Mixer Window.
Executes the Undo operation.
Executes the Redo operation.
Executes the Save operation.
Enters/Clears a Marker at the current song position.
Hold to continuously rewind.
Moves the song position to the top of the song.
Moves the song position to the previous Marker.
Hold to continuously fast-forward.
Moves the song position to the end of the song.
Moves the song position to the next Marker. (This may not work in
certain conditions.)
Press to stop recording or playback. Pressing this when playback
is stopped goes to the song location at which the song playback
started at last time.
Press to start playback from the current point.
Press this to start song recording. The [F] (Play) and [I] (Rec)
lamp are turned on during recording.
For editing parameters.
For editing parameters.
For editing parameters.
Changes the Slot Number (on page 1 only).
Turns the Effects on or off (on page 1 only).
Selects an Effect Type (on page 1 only).
Edits each of the parameters (on page 2 and later).
Changes the Slot Number (on page 1 only).
Turns the Effects on or off (on page 1 only).
Edits each of the parameters (on page 2 and later).
Changes the Slot Number (on page 1 only).
Turns the software tone generator on or off (on page 1 only).
Edits each of the parameters (on page 2 and later).