Yamaha MOTIF ES6 Data List page 65

(3) TRANSMIT/RECEIVE DATA
(3-1) CHANNEL VOICE MESSAGES
STATUS 1000nnnn(8nH)
NOTE No. 0kkkkkkk
VELOCITY 0vvvvvvv
Receive only
STATUS 1001nnnn(9nH)
NOTE NUMBER 0kkkkkkk
VELOCITY NOTE ON 0vvvvvvv(v≠0)
NOTE OFF 0vvvvvvv(v=0)
STATUS 1011nnnn(BnH)
CONTROL NUMBER 0ccccccc
CONTROL VALUE 0vvvvvvv
* TRANSMITTED CONTROL NUMBER
c = 0 BANK SEL MSB
c = 32 BANK SEL LSB
c = 1 MODULATION
c = 7 MAIN VOLUME
c = 10 PAN
c = 11 EXPRESSION
c = 64 SUSTAIN SWITCH
c = 71 FILTER RESONANCE
c = 72 EG RELEASE TIME
c = 73 EG ATTACK TIME
c = 74 FILTER CUTOFF FREQ
c = 75 EG DECAY TIME
c = 91 REVERB SEND
c = 93 CHORUS SEND
c = 0..95 ASSIGNABLE CONTROLLERS
The Sequencer Part will play back all recorded control change messages.
* RECEIVED CONTROL NUMBER
c = 0 BANK SEL MSB
c = 32 BANK SEL LSB
c = 1 MODULATION
c = 5 PORTAMENTO TIME
c = 6 DATA ENTRY MSB
c = 38 DATA ENTRY LSB
c = 7 MAIN VOLUME
c = 10 PAN
c = 11 EXPRESSION
c = 31 EG SUSTAIN LEVEL
c = 64 SUSTAIN SWITCH
c = 65 PORTAMENTO SWITCH
c = 66 SOSTENUTO
c = 71 HARMONIC CONTENT
c = 72 EG RELEASE TIME
c = 73 EG ATTACK TIME
c = 74 BRIGHTNESS
c = 75 EG DECAY TIME
c = 91 EFFECT1 DEPTH
c = 93 EFFECT3 DEPTH
c = 96 DATA ENTRY INC
c = 97 DATA ENTRY DEC
c = 0..95 ASSIGNABLE CONTROLLER
c = 0..95 ARPEGGIO SW
c = 0..95 ARPEGGIO HOLD
All Control Change events can be recorded to the song/pattern.
*1 Used only when a value is set using RPN.
*2 Invalid with Drum Voices.
*3 Relation between BANK CHANGE and PROGRAM is as follows:
CATEGORY
GM Voice
GM Drum Voice
Normal Voice Preset 1
Preset 2
Preset 3
Preset 4
Preset 5
Preset 6
User1
User2
Drum Voice Preset
User
Plug-in Voice User 1
User 2
User 3
Performance User
Sample Voice
Mixing Voice
Plug-in Voice Preset 1 (Slot1)
Preset 2 (Slot1)
Preset 3 (Slot1)
Preset 1 (Slot2)
Preset 2 (Slot2)
Preset 3 (Slot2)
Preset 1 (Slot3)
Preset 2 (Slot3)
Preset 3 (Slot3)
n = 0 – 15 CHANNEL NUMBER
k = 0 (C-2) – 127 (G8)
V: ignored
n = 0 – 15 CHANNEL NUMBER
k = 0(C-2) – 127(G8)
n = 0 – 15 CHANNEL NUMBER
; v = 0 - 127
; v = 0 - 127
; v = 0 - 127
; v = 0 - 127
; v = 0 - 127
; v = 0 - 127
; v = 0, 127
; v = 0:-64 - 64: 0 - 127:+63
; v = 0:-64 - 64: 0 - 127:+63
; v = 0:-64 - 64: 0 - 127:+63
; v = 0:-64 - 64: 0 - 127:+63
; v = 0:-64 - 64: 0 - 127:+63
; v = 0, 127
; v = 0, 127
; v = 0 - 127
; v = 0 - 127
; v = 0 - 127
; v = 0 - 127
; v = 0 - 127
; v = 0 - 127
; v = 0 - 127
; v = 0 - 127
; v = 0 - 127
; v = 0 - 127
; v = 0:-64 - 64:0 - 127:+63
; v = 0 - 63:OFF, 64 - 127:ON
; v = 0 - 63:OFF, 64 - 127:ON
; v = 0 - 63:OFF, 64 - 127:ON
; v = 0:-64 - 64:0 - 127:+63
; v = 0:-64 - 64:0 - 127:+63
; v = 0:-64 - 64:0 - 127:+63
; v = 0:-64 - 64:0 - 127:+63
; v = 0:-64 - 64:0 - 127:+63
; v = 0 - 127
; v = 0 - 127
; v = 127
; v = 127
; v = 0 - 127
; v = 0 - 63:OFF, 64 - 127:ON
; v = 0 - 63:OFF, 64 - 127:ON
MSB LSB PROGRAM No.
0 0 0..127 (1..128)
127 0 0..1 (1..2)
63 0 0..127 (1..128)
63 1 0..127 (1..128)
63 2 0..127 (1..128)
63 3 0..127 (1..128)
63 4 0..127 (1..128)
63 5 0..127 (1..128)
63 8 0..127 (1..128)
63 9 0..127 (1..128)
63 32 0..63 (1..64)
63 40 0..31 (1..32)
63 24 0..63 (1..64)
63 25 0..63 (1..64)
63 26 0..63 (1..64)
63 64 0..127 (1..128)
63 50 0..127 (1..128) *7
63 60 0..15 (1..16) *8
63 70 0..63 (1..64) *4
63 71 0..63 (1..64) *4
63 72 0..63 (1..64) *4
63 73 0..63 (1..64) *4
63 74 0..63 (1..64) *4
63 75 0..63 (1..64) *4
63 76 0..63 (1..64) *4
63 77 0..63 (1..64) *4
63 78 0..63 (1..64) *4
*4 Can be selected only when the corresponding Plug-in board has been installed.
*5 Transmitted/received only when MODE2 is selected in CONTROL CHANGE MODE.
*6 The default CONTROL NUMBERs of ASSIGNABLE CONTROLLER are as follows:
BREATH CONTROLLER
FOOT CONTROLLER
Assign 1
Assign 2
Assign A
Assign B
FOOT SWITCH
ARPEGGIO HOLD
ARPEGGIO SWITCH
*7 Can be selected only in the Song/Pattern mode. Up to 128 sample voices are available in a song/pattern.
*8 Can be selected only in the Song/Pattern mode. Up to 16 mixing voices are available in a song/pattern.
PORTAMENTO TIME sets the time it takes for the pitch to reach the next note played when
PORTAMENTO SWITCH is set to on.
PAN position relatively changes according to the preset value for each voice.
EFFECT1 DEPTH controls reverb send level.
EFFECT3 DEPTH controls chorus send level.
HARMONIC CONTENT adjusts the resonance preset for each voice. Setting a value adds to or subtracts from the
center value, 64, since it is an offset parameter. The larger the value more resonant sound will be produced. The
effective range may be narrower than the range you can designate depending on the selected voice.
The parameters, EG ATTACK TIME, EG DECAY TIME, EG SUSTAIN LEVEL, EG RELEASE TIME adjust the
envelopes preset for each voice. Setting these values add to or subtract from the center value, 64, since these are
*3
offset parameters.
*3
BRIGHTNESS adjusts the cutoff frequency preset for each voice. Setting a value adds to or subtracts from the
center value, 64, since it is an offset parameter. The smaller the value the cutoff frequency will be lowered. The
effective range may be narrower than the range you can designate depending on the selected voice.
Bank Select will be actually executed when the Program Change message is received. Bank Select and Program
Change numbers that are not supported by Yamaha will be ignored, but transmitted to the Plug-in board.
STATUS
PROGRAM NUMBER
*6
STATUS
VALUE
*3
*3
STATUS
LSB
*2
MSB
*1
Transmitted with a resolution of 7 bits.
*1
(3-2) CHANNEL MODE MESSAGES
*2,*5
STATUS
*2
CONTROL NUMBER
*2
CONTROL VALUE
*2
*2
All the sounds currently played including the channel messages such as note-on and hold-on in a certain channel
are muted when receiving this message.
Resets the values set for the following controllers.
*1
PITCH BEND CHANGE
*1
CHANNEL AFTER TOUCH
*6
MODULATION
*6
EXPRESSION
*6
BREATH CONTROLLER
FOOT CONTROLLER
Assign A
Assign B
Assign 1
Assign 2
SUSTAIN SWITCH
SOSTENUTO SWITCH
RPN
Doesn't reset the following data:
PROGRAM CHANGE, BANK SELECT MSB/LSB, VOLUME, PAN, HARMONIC CONTENT, SUSTAIN LEVEL,
RELEASE TIME, ATTACK TIME, DECAY TIME, BRIGHTNESS, EFFECT SEND LEVEL 1, EFFECT SEND
LEVEL 3, PORTAMENTO SWITCH, PITCH BEND SENSITIVITY, FINE TUNING, COARSE TUNING
All the notes currently set to on in certain channel(s) are muted when receiving this message. However, if Sustain or
Sostenuto is on, notes will continue sounding until these are turned off.
Performs the same function as when receiving ALL NOTES OFF.
Sets VOICE RECEIVE CHANNEL to "OMNI OFF," channel 1.
Performs the same function as when receiving ALL NOTES OFF.
Sets VOICE RECEIVE CHANNEL to "OMNI ON."
Performs the same function as when receiving ALL SOUNDS OFF. If the 3rd byte (mono) is within 0 through 16, the
channel will be Mode4 (m = 1).
In the Voice mode, the mode can be Mode2 (m = 1) according to VOICE RECEIVE CHANNEL.
Performs the same function as when receiving ALL SOUNDS OFF. The channel will be Mode3.
In the Voice mode, the mode can be Mode1 according to VOICE RECEIVE CHANNEL.
MIDI Data Format
2
4
16
17
18
19
88
89
90
1100nnnn(CnH) n = 0 – 15 CHANNEL NUMBER
0ppppppp p = 0 – 127
1101nnnn(DnH) n = 0 – 15 CHANNEL NUMBER
0vvvvvvv v = 0 – 127 AFTER TOUCH VALUE
1110nnnn(EnH) n = 0 – 15 CHANNEL NUMBER
0vvvvvvv PITCH BEND CHANGE LSB
0vvvvvvv PITCH BEND CHANGE MSB
1011nnnn(BnH) n = 0 – 15 CHANNEL NUMBER
0ccccccc c = CONTROL NUMBER
0vvvvvvv v = DATA VALUE
0 (center)
0 (minimum)
0 (minimum)
127 (maximum)
127 (maximum)
127 (maximum)
0 (center)
0 (center)
0 (center)
0 (center)
0 (off)
0 (off)
Not assigned; No change
65
Data List