Siemens SICAM Q100 System Manual page 61

2.2.7.28 Registers 2201 to 2498: PQ Calculation for Maximum Harmonics - Voltage
Values (Read Only)
These registers are write-protected. A write attempt will be rejected with exception code 02
(ILLEGAL_DATA_ADDRESS).
The data are calculated within the parameterized time (for example 30 s, 1 min etc.).
Data type: Measured value
Table 2-36
Register
2201
2203 to
2298
2301
2301 to
2398
2401
2403 to
2498
2.2.7.29 Registers 2601 to 2898: PQ Calculation for Average Harmonics - Current
Values (Read Only)
These registers are write-protected. A write attempt will be rejected with exception code 02
(ILLEGAL_DATA_ADDRESS).
The data are calculated within the parameterized time (for example 30 s, 1 min etc.).
Data type: Measured value
Table 2-37
Register
2601
2603 to
2698
2701
SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
Registers 2201 to 2498: PQ Calculation for Maximum Harmonics - Voltage Values
Type of Information
H_Va/Vab-1_MAX
H_Va/Vab-x_MAX
(x = 2 to 49)
H_Vb/Vbc-1_MAX
H_Vb/Vbc-x_MAX
(x = 2 to 49)
H_Vc/Vca-1_MAX
H_Vc/Vca-x_MAX
(x = 2 to 49)
Registers 2601 to 2898: PQ Calculation for Average Harmonics - Current Values
Type of Information
H_Ia-1_AVG
H_Ia-x_AVG
(x = 2 to 49)
H_Ib-1_AVG
Remark
Harmonic (average value), voltage value, c-N, ca
(Fundamental)
Harmonic (average value), voltage value, c-N, ca
(2 bytes for each register)
Harmonic (average value), voltage value, b-N, bc
(Fundamental)
Harmonic (average value), voltage value, b-N, bc
(2 bytes for each register)
Harmonic (average value), voltage value, c-N, ca
(Fundamental)
Harmonic (average value), voltage value, c-N, ca
(2 bytes for each register)
Remark
Harmonic (average value), current value, a
(Fundamental)
Harmonic (average value), current value, a
(2 bytes for each register)
Harmonic (average value), current value, b
(Fundamental)
Communication
2.2 Modbus
Unit
V
V/%
V
V/%
V
V/%
Unit
A
A
A
61