Advertisement
Procedure
2
3
Important: Do not discard any components that are removed until the installation has been completed, as some
existing parts will need to be used for installing the kit.
Description
Actuator bracket
Proximity sensor
Proximity-sensor bracket
Setscrew (6 x 25 mm)
Washer (6 mm)
Locknut (6 mm)
Cap screw (5 x 20 mm)
Washer (5 mm)
Locknut (5 mm)
Spacer
Solenoid valve (closed)
Line body
Bonded seal (3/8 inch)
Adapter (1/4 inch female x 3/8 inch
male)
Bonded seal (1/4 inch)
Hose (1/4 inch x 380 mm), 90° x straight
Tee (1/4 inch male x 1/4 inch male x 1/4
inch female)
Adapter (1/4 inch male x 1/4 inch male),
1.4 mm orifice
Cylinder rod spring pin
Bush
Washer (10 mm)
Valve cylinder
Bonded seal (3/4 inch)
Adapter (1/4 inch male x 3/4 inch male)
Swivel tee (1/4 inch female)
Adapter (1/4 inch male x 1/4 inch male),
0.8 mm orifice
Hose (1/4 inch x 2.156 m)
Adapter (1/4 inch male x 3/8 inch male)
Split pin
Cable tie
Hose tie (368 x 4.8 mm)
Remote-control box
Remote-control bracket
Cap screw (8 x 25 mm)
Washer (8 mm)
Nut (8 mm)
Locknut (8 mm)
Qty.
1
1
1
2
4
2
2
4
2
1
1
1
2
1
1
1
Install the rotary valve cylinder
assembly.
1
1
1
1
1
1
1
1
1
1
1
1
1
8
1
1
2
4
Install the remote control box and
brackets.
8
4
4
3
Use
Advertisement
