Maintenance
What this chapter contains
This chapter contains preventive maintenance instructions.
Safety
WARNING! Read the
performing any maintenance on the equipment. Ignoring the safety instructions can
cause injury or death.
Maintenance intervals
If installed in an appropriate environment, the drive requires very little maintenance.
This table lists the routine maintenance intervals recommended by ABB.
Every 6 to 12 months
(depends on the dustiness of
the environment)
Every year when stored
Every 3 years
Every 6 years
Every 10 years
Consult your local ABB Service representative for more details on the maintenance.
On the Internet, go to http://www.abb.com/drives.
Safety instructions
Interval
Heatsink temperature check
and cleaning
Capacitor reforming
Replacement of additional
cooling fan in IP55 units and in
IP21 units when included
Cooling fan replacement
Frame size R4 and up:
capacitor replacement
on the first pages of this manual before
Maintenance
Instruction
See Heatsink.
See Reforming.
See
Additional fan.
See Fan.
See Capacitors.
Maintenance
97