6.1.4. Control System Operation
6.1.4.1. Navigation
The Control Module CM8001 has a system of configuration, measurements, alarms and remote
management (TELESUPERVISION), that controls all the modules of the transmitter.
The configuration of the transmitter might be done either by its front panel, of the transmitter or the web
interface using a browser of your choice or SNMP.
When the device is turned on, or when it enters in stand-by mode (idle for 5 minutes), the display
switches between the following status screens:
05
01
Current date
02
Current time
03
Operation UHF channel number
04
Real Output Power Value (Watts)
05
Equipment Model:
EC702MP
01
03
06
EC704MP
02
07
06
Transmission System:
ATSC 1.0
ATSC 3.0
07
Power Equipment Model
08
Double Exciter Status
CM8001 Main "Ctr A":
CM8001 Backup "Ctr B":
E-Compact Medium Power
04
08
Active / Standby
Active / Standby
32 | 106