Main Menu ⇨ Measurements - Hitachi E-Compact Medium Power Series Operation Manual

# Parameter
1/9 Power Setup
2/9 Transmitter Setup
3/9 Time and Date Setup
4/9 Password Setup
5/9 Alarms Mask
6/9 USB Host Access
Transistor Bias
7/9
Adjustment
PA Temperature
8/9
Control
9/9 Control Mode
The "Measurements" menu allows access to read the operating parameters of the equipment (read
only).
# Parameter
1/7 Power
2/7 Exciter Status
3/7 Drawers
Position #
1100 1/1
1/2
1200
2/2
1300 1/1
1/2
1400
2/2
1500 1/1
1600 1/1
1/4
2/4
1700
3/4
4/4
1800 1/1
1900 1/1
[2000] - Main Menu ⇨ Measurements
Position #
1/3
2100 2/3
3/3
- -
2300 1/3
Description / Functionality
Changes the output power of the Equipment.
Automatic Level Control: On/Off
Ctr Mode: Active / Standby
Change the date, time and date format (dd/mm/yy or
mm/dd/yy)
Enable / Choose new password
Disable Password
Reflected Power – Set de Alarm Mask for Reflected Power
System Upgrade – Used to system upgrade via USB card.
LDMOS Drain Voltage - The values are pre-set at the factory.
Carrier Amp. Current - The values are pre-set at the factory.
Peak Amp. Gate Voltage - The values are pre-set at the
factory.
Status: show the status exciter: (Active / Standby)
Allows to set the operating temperature of the Powers
Amplifiers.
Enable control module acess remote
Description / Functionality
Programmed: Show the Programmed power measurement.
Forward: Show the value of Forward Output Power (Watts).
Reflected: Show the value of Reflected Output Power (Watts).
ALC Reference Voltage: Show the value (Volts).
Active / Fail
Drawers Measurements
E-Compact Medium Power
35 | 106