Troubleshooting - Beko SIM 3122 T User Manual

Hide thumbs Also See for SIM 3122 T:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

4 Troubleshooting

Problem
Although the appliance is plugged
in, soleplate (6) does not heat up.
The appliance does not generate
steam.
Shock Steam – Vertical Steam does
not function.
Water drops fall down onto the
fabric during ironing.
During ironing, sediments and
residues fall down from the
soleplate (6).
The appliance drops water after it
cools down or stored.
Stains at the soleplate (6).
Steam Iron / User Manual
Possible Reason
The appliance may be connected
improperly
Temperature adjustment knob (5) may
be at the Min. position.
The water reservoir may not have
enough water.
Steam setting button (9) may be at
without-steam position.
These functions may have been used
too frequently in a very short period
of time.
Soleplate (6) may not be hot enough.
You may not have securely closed the
water refill lid (8).
You may be using the shock steam at
temperature level • or ••.
If the water you use for your appliance
is too hard, such sediments may form.
You may have left the appliance on a
horizontal position while there is water
in its reservoir.
Wet garments might have been
ironed and the soleplate (6) has had
lime stains.
Solution
Check the plug and power cable (1) of
the appliance.
Turn the temperature adjustment
knob in the clockwise direction up to
the steam sign.
Fill the water reservoir with water up
to Max level.
Switch the steam setting button to
the steam position.
Keep ironing at a horizontal position
and wait for a while before using the
shock steam function again.
Turn the Temperature adjustment
knob (5) in the clockwise direction up
to the steam sign. Seat the appliance
in a vertical position and wait for the
soleplate to heat up.
Close the water refill lid securely.
Increase the temperature level.
Use the self-clean function for once
or a few times. For the subsequent
ironings fill the water reservoir of the
appliance with a mixture of tap water
and potable water.
Empty the water reservoir.
After the appliance cools enough,
wipe the soleplate with a microfiber
knitted or cotton cloth soaked in
vinegar.
17 / EN

Advertisement

Table of Contents
loading

Table of Contents