Installation; Installation Procedure; Operational Environment; Operating Voltage - Sony DSR-2000A Service Manual

Be sure to install the DSR-2000A/2000AP in location satisfying the required operational environment described below to
assure the DSR-2000A/2000AP superior performance and to maintain the excellent serviceability and accessibility.

2-1. Installation Procedure

Start
Determination of
· · · 2-2. Operational Environment
· · · 2-3. Operating Voltage
installation place
· · · 2-4. Installation Space
Unpacking
· · · 2-5. Supplied Accessories
· · · 2-7. Mounting
Rack mounting
· · · 2-8-1. Connectors/Cables
Connectors
· · · 2-8-2. Input/Output Signals of the Connectors
· · · 2-9. Installation Setup and Adjustment
Initial setup
Operation check · · · If an error message is shown on the time counter, refer to
"Section 4. Error Message" in service manual.
END

2-2. Operational Environment

. Operating temperature :
. Humidity :
. Storage temperature :
. Locations to avoid :
. Horizontal condition :

2-3. Operating Voltage

. Power voltage :
. Power frequency :
. Power consumption :
DSR-2000A/2000AP
Section 2

Installation

+5 dC to +40 dC
80 % or less
_20 dC to +60 dC
. Areas where the unit will be exposed to direct sunlight or any other strong lights.
. Dusty areas or areas where it is subject to vibration.
. Areas with strong electric or magnetic fields.
. High-temperature environment.
(Good air circulation is essential to prevent internal heat build-up. Place the unit in location
with sufficient air circulation. Do not block the ventilation holes on the sides of the cabinet
and the rear panel.)
within ± 30 d
AC 100 V to 240 V
50/60 Hz
120 W
2-1