Cautions On Use Cautions On Use - Epson SCE8720C Series Hardware Manual

CARD-PCI/GX Hardware Manual
8. 8. 8. 8. Cautions on use Cautions on use
Cautions on use Cautions on use
1) Touching SCE8720Cxx (CARD-PCI/GX) while it is in operation or right after it is
turned off may result in a burn because its surface temperature is high. Take the
following countermeasures.
• Notify those who might contact SCE8720Cxx while it is in operation or right after it
is turned off, such as service personnel, of the heat on the surface.
• If necessary, indicate a caution regarding surface temperature somewhere on
SCE8720Cxx after it is installed on device.
• Also if necessary, put a cover so that SCE8720Cxx cannot be touched.
2) If any part defect occurred in SCE8720Cxx, do not supply current over the current
limit (6.1.1) in order to suppress abnormal heating of SCE8720Cxx. If current over
the current limit is supplied to SCE8720Cxx while it is in the error mode, safety of
SCE8720Cxx cannot be guaranteed.
3) Because of its structural limitation, SCE8720Cxx requires countermeasure against
electrostatic noise in customer's system.
4) Do not touch the pin section of SCE8720Cxx with hand or metal.
5) Do not bend, drop or give shock to SCE8720Cxx.
6) Avoid heat, humidity and direct sunlight.
7) Do not insert or remove SCE8720Cxx while its power is turned on.
8) Do not copy or modify BIOS without permission.
9) When designing any product using SCE8720Cxx, refer to the application note as
well.
66
EPSON
Rev.A