Baudrate - Toshiba BC Series Instruction Manual

Baudrate

If GenCP used, the baudrate is possible to change.
*In Legacy protocol used, the baudrate is fixed 9600 bps.
● Registers
GenCP protcol
Register Read Memory
address Write
0x0001 0000 R.O.
0x0001 0004 R/W
● Control procedure
■ In the case of baudrate automatic recognition (CurrentBaudrate = 0x00)
The camera automatically recognizes the baudrate of the received command and responds with the same
baudrate. The PC application can be accessed immediately at the desired baudrate without changing the
camera settings. The baudrate supported for automatic recognition are 9,600 bps, 115,200 bps, and
921,600 bps.
■ In case of baudrate specification operation (CurrentBaudrate = 0x01 / 0x10 / 0x80)
The camera only receives commands at the specified baudrate.
Please refer to GenCP specification for switching sequence.
Legacy mode is disabled during the baudrate specification operation.
Copyright © 2019 Toshiba Teli Corporation, All Rights Reserved.
Default Register name
save
-
0x91 Supported Baudrates
-
0x0 Current Baudrate
9600/115200/921600 bps
Set baudrate.
0x0:auto recognition, 0x1:9600bps, 0x10:115200bps, 0x80:921600bps
34 / 73
Description
D4296087A
http://www.toshiba-teli.co.jp/en/