Observe the following when installing the equipment:
Instruction
Do not place the equipment in locations subject to high moisture, oil fumes,
Avoid
Do not install the equipment in locations exposed to direct sunlight or humidity.
Avoid
Use only specified the power cable and the connection cables.
Instruction
Do not give strong impact against the equipment.
Avoid
When performing connection, turn off power.
Instruction
Do not expose its camera head to any intensive light (such as direct sunlight).
Avoid
Avoid short-circuiting signal output.
Avoid
Avoid giving a strong shock against the camera body.
Avoid
Contact your sales representative to request periodic inspection and cleaning
Instruction
Copyright © 2019 Toshiba Teli Corporation, All Rights Reserved.
·Do not cover the equipment with a cloth, etc.
·Do not place the equipment in a narrow location where heat is likely to accumulate.
Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire.
steam, or dust.
Otherwise, fire or electric shock may result.
Otherwise, the internal temperature of the equipment will rise, which may cause a fire.
Otherwise, fire or electric shock may result.
It may cause the trouble.
When connecting the power cable and the connection cable, turn off the equipment
power.
Otherwise, fire or electric shock may result.
Otherwise, its inner image pickup device might get damaged.
Otherwise, a malfunction may occur.
It might cause a breakdown or damage. If your camera is used in a system where its
camera connector is subjected to strong repetitive shocks, its camera connector is
possible to break down. If you intend to use your camera in such a situation, if
possible, bundle and fix a camera cable in the place near the camera, and do not
transmit a shock to the camera connector.
(every approx five years).
Accumulation of dust inside the equipment may result in fire or electric shock.
For inspection and cleaning costs, contact your sales representative.
CAUTION
3 / 73
D4296087A
http://www.toshiba-teli.co.jp/en/