Toshiba BC Series Instruction Manual page 69

● Register
IIDC2 address
Register Read
address Write
0x0020 807C R/W
0x0020 809C R/W
0x0021 F2FC R/W
Legacy address
Register Read
address Write
0x6C R/W
0x6D W.O.
0x6E W.O.
● Control procedure
■ User settings Save and Load
IIDC2 address
Select a channel of user setting by 'UserSetSelector' register.
Save the user settings by writing '0x9' to 'UserSetCommand' register.
Load the user settings by writing '0x8' to 'UserSetCommand' register.
After execution of 'UserSetSave' or 'UserSetLoad', wait until 'UserSetCommand' is '0x0' (=Done).
Legacy address
Select a memory channel setting by 'Memory bank' register.
Save the user settings by writing '0x1' to 'Memory save' register.
Load the user settings by writing '0x1' to 'Memory load' register.
■ Setting of UserSetDefault
IIDC2 address
Select a channel of user setting when camera powers up by 'UserSetDefault'.
Select a channel of user setting by 'UserSetDefault' register.
Save the user settings by writing '0x9' to 'UserSetCommand' register, and the user setting channel to
be loaded at camera startup is saved.
Copyright © 2019 Toshiba Teli Corporation, All Rights Reserved.
Memory
Default Register name
save
- 0x0 UserSetSelector
- 0x0 UserSetCommand
✓ 0x0 UserSetDefault
Memory
Default Register name
save
- 0x0 Memory bank
- - Memory save
- - Memory load
Sets the memory channel of UserSet.
0x0:Default, 0x1:UserSet1 ～ 0xF:UserSet15
Read / Write the UserSet.
0x0:Done, 0x8:Load, 0x9:Save, 0x7F:Erase
Selects a channel of user setting when camera powers up.
0x0:Default, 0x1:UserSet1 ～ 0x15:UserSet15
Sets the memory channel of UserSet.
0x0:Default,0x1:UserSet1 ～ 0xF:UserSet15
0x1: Save user settings.
0x1: Load user settings from selected memory bank.
67 / 73
Description
Description
D4296087A
http://www.toshiba-teli.co.jp/en/