Cover setscrew
Fig. 1
Remove the tape separator.
2
1
Panel
Mtg screws for the breaker.
M4 1.5N·m
Fig. 9
Mtg screws for MDS.
M4 1.5N·m
Fig. 13
Indicating plate hole
Direction for the plate.
Install the indicating plate.
Fig. 5
Power supply module
Terminal cover
M3×8 0.4N·m
Terminal cover
Fig. 2
Fix block on
the rear side of cover.
The block prevents the plate
from bursting out of cover.
Detail of installed the indicating plate.
Mtg screw.
M4×8 1.5N·m
Fig. 10
Power supply module
Terminal cover
M3×8 0.4N·m
Mtg screw.
M3×12 0.6-0.8N·m
Indicating plate
Mtg screw.
M4×8 1.5N·m
Fig. 14
58