Panasonic SF2B Series Quick Instruction Manual page 40

5. Mounting
● For selecting the appropriate mounting bracket matched to the installation environment,
the mounting bracket is not incorporated in this device. Please purchase the optional
mounting bracket to fit on the mounting environment.
● Do not apply the load such as forced bending to the cable of this device. Applying im-
proper load could cause the wire breakage.
● The minimum bending radius of the cable is R6mm. Mount the device considering the
cable bending radius.
<Reference>
Mount the emitter and the receiver at the same level and parallel to each other. The effective aperture
angle of this device is ±5° or less at a sensing distance of 3m or more.
<When the standard mounting bracket (MS-SF2B-1) (optional) is used>
The standard mounting bracket (MS-SF2B-1) (optional) configures as follows.
1. Fix the standard mounting bracket with two hexagon-socket head bolts [M3 (length:
5mm)]. The tightening torque should be 0.6N·m or less.
2. For side mounting, remove the B part.
40
CAUTION
Hexagon-socket head bolt
[M5 (length: 5mm)]
B part
A part
Hexagon-socket head bolt
[M5 (length: 5mm)]
This device
Hexagon-socket head bolt
[M5 (length: 5mm)]
B part
© Panasonic Industrial Devices SUNX Co., Ltd. 2016