Setting The Projector Id; Setting The Remote Control Id - Epson LightScene EV-110 User Manual

Setting the Remote Control ID

Parent topic:

Setting the Projector ID

If you want to control multiple projectors from a remote control, give each projector a unique ID.
1. Press the Menu button.
2. Select the Extended menu and press
3. Select the Multi-Projection menu and press
4. Select Projector ID and press
5. Press the arrow buttons on the remote control to select the identification number you want to use for
the projector. Then press
Repeat these steps for all the other projectors you want to operate from one remote control.
Note: If you don't know the projector's ID, aim the remote control at the projector and press the ID button
to temporarily display the projector's ID on the screen.
Parent topic:
Setting the Remote Control ID
The remote control's ID is set to zero by default so it can operate any compatible projector. If you want to
set the remote control to operate only a particular projector, you need to set the remote control's ID to
match the projector's ID.
Using Multiple Projectors
Enter.
Enter.
Projector Identification System for Multiple Projector Control
Enter.
Enter.
107