Epson LightScene EV-110 User Manual page 149

Setting
Standby Mode
DC Out (2.0A)/GPI In Settings
Options Description
Standby Mode Selects the following when the projector
is in standby mode (turned off):
Port
Standby Mode: Communication On
indicates that the projector can be
monitored and controlled over a network
when the projector is in standby mode;
enable this setting to monitor and control
the projector over a network when the
projector is in standby mode
When monitoring or controlling the
projector using wireless LAN, set
Connection Mode to Advanced
Port: selects the Wired LAN or Wireless
LAN port to use while the Standby Mode
setting is set to Communication On
DC Out (2.0A)/GPI In Select which operation to execute
depending on the input signal from the
device, such as when an external sensor
is connected to the DC Out (2.0A)/GPI In
port.
DC Out/GPI In: enables or disables GPI-
1 Settings and GPI-2 Settings. Set to
Always On/On to enable the GPI
settings. Also, set to Always On/On to
keep the external sensor device
operating and continue supplying power
to the streaming media player when the
projector is not projecting images. This
lets the device start earlier, or perform
updates automatically over a network if
necessary. Set to Off to continue using
the USB port for power.
149