BTS3900(A) GSM
Commissioning Guide
Figure 5-8 Deploy DRRU dialog box
Step 5 ClickOK. The configuration of the RF module is complete.
Figure 5-9
Figure 5-9 Topology Configuration window
Step 6 Click Close to return to the Board Configuration window. Right-click the slot where the board
is configured, and choose the board to be configured from the shortcut menu.
Configure the APMU/DPMU, FMU, and GATM as shown in
Issue 02 (2009-04-20)
NOTE
Card Type refers to the DRRU, DRFU, MRRU, GRRU, MRFU, or GRFU. The card number starts from
0 in sequence. The SFP number ranges from 0 to 5 and each number refers to the SFP port where the board
is configured. The hop number ranges from 1 to 6 and each number refers to the level of the TRXs under
the same SFP number.
shows the Topology Configuration window.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Commissioning the BTS (Transmission Unavailable)
Figure
5-10.
5-9