Table of Contents
Advertisement
Maintenance
Note:
Determine the left and right sides of the machine from the normal operating position.
Maintenance Safety
•
Before you leave the operator's position, do the
following:
– Park the machine on a level surface.
– Shut off the machine.
– Engage the parking brake.
– Shut off the engine and remove the key (if
equipped).
– Wait for all movement to stop.
•
Allow machine components to cool before
performing maintenance.
•
Perform only those maintenance instructions
described in this manual. If major repairs are
ever needed or assistance is desired, contact an
authorized Toro distributor.
•
If possible, do not perform maintenance while the
engine is running. Keep away from moving parts.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first hour
After the first 10 hours
Before each use or daily
Every 40 hours
Every 200 hours
Every 800 hours
Every 1,000 hours
Every 2,000 hours
Maintenance Procedure
• Torque the wheel bolts.
• Torque the wheel bolts.
• Check the tire air pressure.
• Check the hydraulic lines and hoses
• Check the hydraulic fluid level.
• Check the brush position and wear.
• Lubricate all the grease fittings.
• Torque the wheel bolts.
• If you are not using the recommended hydraulic fluid or have ever filled the reservoir
with an alternative fluid, replace the hydraulic filter.
• If you are not using the recommended hydraulic fluid or have ever filled the reservoir
with an alternative fluid, change the hydraulic fluid.
• If you are using the recommended hydraulic fluid, replace the hydraulic filter.
• If you are using the recommended hydraulic fluid, change the hydraulic fluid.
•
Do not check or adjust the chain tension when the
vehicle engine is running.
•
Carefully release pressure from components with
stored energy.
•
Support the machine with jack stands whenever
you work under the machine.
•
After maintaining or adjusting the machine, ensure
that all guards are installed.
•
Keep all parts of the machine in good working
condition and all hardware tightened.
•
Replace all worn or damaged decals.
•
To ensure safe, optimal performance of the
machine, use only genuine Toro replacement
parts. Replacement parts made by other
manufacturers could be dangerous, and such use
could void the product warranty.
19
Advertisement
Table of Contents
