Assembling The Hitch To The Traction-Unit Drawbar; Mounting The Optional Tongue Jack - Toro Topdresser 2500 Operator's Manual

1. Back of the machine
2. Lynch pins
2
Assembling the Hitch to the
Traction-Unit Drawbar
No Parts Required
Procedure
1. Adjust the position of the hitch clevis to the
tongue so that the tongue is level with the
drawbar of the traction unit
Figure 4
3. Clevis pin
4. Rear receiver tube
(Figure 5).
1. Locknut
2. Washer
3. Tongue
4. Capscrew
g269254
2. Assemble the hitch clevis to the tongue with the
2 capscrews, 4 washers, and 2 locknuts
5).
3. Torque the capscrews and locknuts to 183 to
223 N∙m (135 to 165 ft lb).
4. Secure the hitch to the drawbar with the hitch
pin and hairpin
3
Mounting the Optional
Tongue Jack
Parts needed for this procedure:
1 Jack (optional)
Assembling the Optional Jack to
the Tongue
1. Slide jack onto jack-mount tube of tongue
(Figure 6).
8
Figure 5
5. Hairpin
6. Hitch pin
7. Hitch clevis
(Figure 5).
g269296
(Figure