Toshiba IPedge Manual page 10

PROGRAMMING
System Timer
Assign Station Park and
Hold Setting
Assign a Call Park Orbit key
to a station
Modify Call Park Orbit
Codes
Add New Flexible Access
Code
© 2011 Toshiba Information Systems, Inc. All Rights Reserved. All product, service and company names are trademarks, registered trademarks or
service marks of their respective owners. This document and the information included herein is subject to change without notice.
Call Park gives any station, regardless of type, a method for holding calls.
Parking a call leaves you free to make other calls and retrieve the parked
call at a later time. You can also page to have someone else pick up the
parked call.
1. Click on System > System Timer.
2. Select the Server from the dropdown.
3. Adjust the Park Recall Timer as needed.
4. Click on Save icon.
1. Click on Station > Station Assignment.
2. Check the Station to be programmed.
3. Click on Edit icon.
4. Select Show Advance Configuration.
5. Assign the Park and Hold setting. Enable allows other stations to
access a trunk parked by this station. Disabled: the trunk will appear
busy.
6. Click on Save icon.
1. Click on System > Station Assignment.
2. Check the Station to be programmed.
3. Click on Edit icon.
4. Select the Key tab.
5. Right-click the key to be programmed. This will highlight the key and
pop-up a screen with button types.
6. Select Park Page > Call Park Orbit.
7. Click on Save icon.
Optional
1. Click on System > Flexible Access Codes.
2. Click the access code to be changed.
3. Click Delete.
4. Confirm the deletion of the code.
Optional
1. Click on New icon.
2. Enter the code.
3. Select the feature from the drop down.
4. Click on Save icon.
IPedge / VIPedge Feature Desc. 7/25/12
1-3