Toshiba IPedge Manual page 9

Call Park
Park a Call
Retrieve a Parked Call
© 2011 Toshiba Information Systems, Inc. All Rights Reserved. All product, service and company names are trademarks, registered trademarks or
service marks of their respective owners. This document and the information included herein is subject to change without notice.
The Call Park feature enables you to hold a call temporarily in a location
other than your telephone. These areas are called orbits. You or another
telephone user can retrieve a parked call from its orbit by specifying the
orbit number. You can specify one of 20 General Park Orbits (7000~7019)
or a valid extension number within the system.
Once you have parked a call in an orbit, you can:
• Hang up and retrieve the parked call at a later time.
• Originate another call.
• Access a voice paging device to announce the parked call for pickup
from another station.
If you park a call and it is not retrieved, it will recall to the parking station
and one of the following occurs:
• If your station is idle when the system Call Park recall timer expires,
the parked call automatically recalls to your station.
• If your station is busy, the parked call camps on.
If you have an LCD telephone, you can let the system automatically select
an available orbit number which displays on your LCD.
1. While on a call, press Park in Orbit or press Cnf/Trn + #33. The LED
flashes green (consultation-hold). If you were on an extension during
the call, and you have line button on your telephone, the line LED will
flash until the call is picked up (depending on programming).
2. Specify the Park Orbit using one of the following:
*
• Press and the system automatically selects a General Park
Orbit between 7000~7019. The chosen orbit appears on the
LCD.
• Enter a valid extension.
• Press # and the system automatically selects your extension
as the orbit.
3. Hang up. The caller's extension or line number and the orbit number
are shown. If the parked call is not retrieved within a specified time,
the call rings back to your telephone. When a parked call recalls your
telephone, the LCD shows the line or extension that is recalling and
the orbit number.
1. Press Park in Orbit or press your extension button + #32.
2. Enter the Orbit Number where the call is parked or # for the extension
from which you are calling. You cannot use
The extension LED flashes at the in-use rate when the call is
retrieved.
IPedge / VIPedge Feature Desc. 7/25/12
*
to retrieve a parked call.
1-2